13.07.2015 Views

Feasibility Study and Technical Report - Pretivm

Feasibility Study and Technical Report - Pretivm

Feasibility Study and Technical Report - Pretivm

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Fresh Water Supply SystemFresh water will be supplied to a fresh/fire water storage tank from the water treatmentplant or from Brucejack Lake. Fresh water will primarily be used for:• fire water for emergency use• cooling water for mill motors <strong>and</strong> mill lubrication systems• gl<strong>and</strong> water for the slurry pumps• reagent make-up• process water make-up.The fresh/fire water tank will be equipped with a st<strong>and</strong>pipe, which will ensure that thetank is always holding at least a 2 hour supply of fire water.There will be two potable water supply systems – one located in theprocess/administration/truck shop complex, <strong>and</strong> one at the camp. Potable water will besupplied from wells, <strong>and</strong> will be treated (chlorination <strong>and</strong> filtration) <strong>and</strong> stored in thepotable water storage tanks prior to delivery to various service points.Process Water Supply SystemThe overflow solutions from the concentrate thickener <strong>and</strong> tailings thickener will be reusedin the process circuit. The balance of the process water will be supplied from thewater treatment plant, which will treat water from the mine (underground water) <strong>and</strong>water collected from the plant site or from Brucejack Lake, as required. All process waterrequired will be distributed to the process plant from an 8.0 m diameter by 8.0 m highprocess water tank.AIR SUPPLYAir service systems will supply air to the following service areas:• Crushing circuit – high-pressure air will be provided by an air supply systemlocated underground for dust suppression <strong>and</strong> equipment services.• Dust collection at the transfer tower <strong>and</strong> SAG mill surge bin – high-pressure airwill be provided by dedicated compressors for dust suppression.• Flotation – low-pressure air for flotation cells will be provided by air blowers.• Filtration circuit – high-pressure air will be provided by dedicated aircompressors for filtration <strong>and</strong> drying.• Plant air service – high-pressure air will be provided by dedicated aircompressors for the various services.• Instrumentation – the service air will come from the plant air compressors <strong>and</strong>will be dried <strong>and</strong> stored in a dedicated air receiver.Pretium Resources Inc. 17-14 1291990200-REP-R0012-02<strong>Feasibility</strong> <strong>Study</strong> <strong>and</strong> <strong>Technical</strong> <strong>Report</strong> on the BrucejackProject, Stewart, BC

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!