BSA Flow Software Installation and User's Guide - CSI

The axes will automatically rescale when you start acquiring data.
15. To start acquisition, click on BSA Application in the project explorer, and
click on the Run button in the tool bar (or press the F5 button on the
keyboard).
The histogram will be updated during the measurement. With 2000 samples
selected, all data is usually sent in a single block, so the histogram updates
once only. The update rate depends on the data rate. With high data rates and
a large number of samples, you will see several updates during an
acquisition.
16. When the acquisition is completed, the “Run” button is clear again. If the
System monitor is open, either the Samples or Acquisition bar graph is at
full scale.
Under the menu “Tools - Options - General” you can select “Feedback with
sound”. With this option active, you will hear a beep from the PC when
acquisition is completed.
You have now completed data acquisition in a single point. To save the data,
click the Save button in the toolbar (or select File-Save in the menu bar),
and give the project file a name. It will be stored in the My Flow Projects
folder.
You can add further processing objects, data lists or graphs by right mouse
clicking on the BSA Application icon in the project explorer and selecting
“new” from the dialog that appears.
To save time when new objects have been added, you can run those objects
alone by clicking on the highest level object you want to run, and then click
the “Run” button or press F5 on the keyboard. This will run the object and
it’s child objects.
BSA Flow Software: The user interface 4-61