AT Commands Reference Manual - wireless netcontrol GmbH

Chapter 3: AT Commands Reference
Example
AT+CCFC=?
+CCFC: (0,1,2,3,4,5)
OK
//Register UC forward-to of all voice call
AT+CCFC=0,3,"01256316830",129,1
OK
AT+CCFC=1,2 //Interrogate reason not-reachable of all classes.
+CCFC: 1,1,"+97254151200",145,,,
OK
//Register C forward-to data circuit sync after 15 sec.
AT+CCFC=1,3,"0541234567",129,16,,,15
OK
//Register C forward-to data circuit async - default 20 sec.
AT+CCFC=1,3,"0541234567",129,32
OK
AT+CCFC=1,2
//Interrogate reason not-reachable of all classes.
+CCFC: 1,16,"+972541234567",145,,,
+CCFC: 1,32,"+972541234567",145,,,
OK
AT+CCFC=0,0 //Deactivate UC forward-to of all classes.
OK
AT+CCFC=0,2
+CCFC: 0,255
OK
// Interrogate UC forward - forward calls are disabled
AT+CCFC=0,1
OK
//Activate UC forward-to of all classes.
AT+CCFC=0,2
// Interrogate UC forward - forward calls are enabled
+CCFC: 1,1,"+ 972541234567",145,,,
OK
AT+CCFC=4,2
+CME ERROR: retry operation
+CLIR, Calling Line Identification Restriction
This command instructs the H24 to query, enable or disable the presentation of the CLI (calling
line ID) of a MO call to the called party. The restriction of the CLI (disable presentation) is
dependent both on the H24 and on the network.
The network enables three possible provisions of CLIR:
April 15, 2010 H24 - AT Commands Reference Manual 3-31