AT Commands Reference Manual - wireless netcontrol GmbH

SMS
Note:
• Incoming Status-Report messages are store at .
• Incoming Status-Report messages will be store at EF-smss as SMS-Deliver.
• Messages will not be store when storage is full.
• Sending SMS via +CMSS is always from storage.
Example
AT+CMGF=1
OK
AT+CPMS=?
+CPMS: ("ME","SM"),("ME","SM"),("ME","SM")
OK
AT+CPMS?
+CPMS: "ME",0,23,"ME",0,23,"SM",0,20
OK
AT+CPMS="SM"
+CPMS: 0,20,0,23,0,20
OK
AT+CMGW="0547298743"
> MEM2=ME MEM3=SM
// store outgoing SMS to ME storage
+CMGW: 0
OK
AT+CPMS?
+CPMS: "SM",0,20,"ME",1,23,"SM",0,20
OK
AT+CMSS=0 // Send the stored message to my self (H24 number is: "0547298743")
+CMSS: 0
OK
AT+CPMS?
+CPMS: "SM",1,20,"ME",1,23,"SM",1,20 // The received SMS is stored in MEM3 - SM storage
OK
+CMGF, Message Format
This command is a basic command. The Set command handles the selection of the message
format used with send, list, read and write commands, as well as the format of unsolicited result
codes resulting from message receipts. The H24 supports both PDU mode (where entire TP data
3-80 H24 - AT Commands Reference Manual April 15, 2010