AT Commands Reference Manual - wireless netcontrol GmbH

Chapter 3: AT Commands Reference
OK
AT+CPBR=?
+CPBR: (1-250,40,24)
OK
AT+CPBR=1,3
OK
AT+CPBR=1,250
+CPBR: 1,"+97252999080", 145,"Voice Mail"
OK
AT+CPBS="FD",""
OK
//+CPBW pin2 unlocked
AT+CPBS="FD",""
+CME ERROR: incorrect password
AT+CPBS="SD",""
+CME ERROR: operation not allowed
AT+CPBS="FD",""
+CME ERROR: text string too long
+CPBR, Read Phone Book Entries
This command recalls phone book entries from a specific entry number or from a range of entries.
If only one entry is specified, and that entry is empty, OK is returned. If a range of entries is
requested, all entries that contain data within that range are returned. If a listing fails in a H24
error, +CME ERROR: is returned.
This command can also be used to obtain information about the number of entries and the
maximum size of a phone number and alpha tag fields in the phone book.
This command acts on the currently active phone book, as selected with the +CPBS.
Command
Type
Syntax Response/Action Remarks
Set
+CPBR=
[,]
[+CPBR:
,,,
[
+CPBR:
,,,]]
OK
or:
+CME ERROR:
Test +CPBR=? +CPBR: (list of supported
s),[], []
OK
April 15, 2010 H24 - AT Commands Reference Manual 3-67