AT Commands Reference Manual - wireless netcontrol GmbH

Chapter 3: AT Commands Reference
Table 3-56: +CMT Parameters (Cont.)
Description
In PDU mode: Size of message, in octets, excluding SMSC data.
In TEXT mode: number of characters included in the
Message header and contents in PDU mode format. See description in “+CMGR,
+MMGR, Read Message” on page 3-100.
Example
AT+CMGF=1
OK
AT+CSMS=1
+CSMS: 1,1,1
OK
AT+CNMI=1,2
OK
AT+CMGS="1234"
> Test
// Send message to myself
+CMGS: 87
OK
+CMT: "1234",,"09/03/09,08:28:54+08"
Test
+CDSI, Unsolicited Response (New SMS-STATUS-REPORT
Indication)
The +CDSI unsolicited response is sent to the TE upon receipt of a new SMS-STATUS-REPORT
SM, if the +CNMI parameter is set to ’2’. For further information, refer to “+CNMI, New
Message Indications to Terminal” on page 3-91.
This unsolicited message indicates that a new SMS-STATUS-REPORT message was received,
and is stored in location .
Unsolicited Response
+CDSI: ,
The following table shows the +CDSI parameters.
Table 3-57: +CDSI Parameters
Description
Memory Storage according to +CPMS settings:
"SM" or "ME".
Location of the new message in .
April 15, 2010 H24 - AT Commands Reference Manual 3-97