14.03.2015 Views

AT Commands Reference Manual - wireless netcontrol GmbH

AT Commands Reference Manual - wireless netcontrol GmbH

AT Commands Reference Manual - wireless netcontrol GmbH

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

GPRS/EDGE/UMTS<br />

Command<br />

Type Syntax Response/Action Remarks<br />

Read <strong>AT</strong>+CGQMIN? +CGQMIN:<br />

,,,, ,<br />

OK<br />

or:<br />

+CME ERROR: <br />

Test <strong>AT</strong>+CGQMIN=? +CGQMIN: ,(list of<br />

supported<br />

s),(list of supported<br />

s),(list of supported<br />

s),(list of supported<br />

s),(list of supported s)<br />

[+CGQMIN:<br />

,(list of<br />

supported s),(list of<br />

supported s),(list of<br />

supported<br />

s),(list of supported<br />

s),(list of supported s)<br />

[…]]<br />

Read command returns<br />

the current settings for<br />

each defined context.<br />

Test command returns<br />

values supported as a<br />

compound value. If the<br />

ME supports several PDP<br />

types, the parameter<br />

value ranges for each<br />

PDP type are returned on<br />

a separate line.<br />

OK<br />

OR<br />

+CME ERROR: <br />

Note: Any omitted parameters in set command will be set to 0.<br />

Set values are stored in NVM and remain in effect across power cycles.<br />

The following table shows the +CGQMIN parameters.<br />

Table 3-190: +CGQMIN Parameters<br />

<br />

<br />

<br />

<br />

<br />

<br />

<br />

Description<br />

A numeric parameter that specifies a particular PDP context definition.<br />

The supported values are: 1 to 16.<br />

A numeric parameter that specifies the precedence class.<br />

The supported values are: 1 to 3.<br />

A numeric parameter that specifies the delay class.<br />

The supported values are: 1 to 4.<br />

A numeric parameter that specifies the reliability class.<br />

The supported values are: 1 to 5.<br />

A numeric parameter that specifies the peak throughput class.<br />

The supported values are: 1 to 4.<br />

A numeric parameter that specifies the mean throughput class.<br />

The supported values are: 1 to 18 and 31.<br />

3-292 H24 - <strong>AT</strong> <strong>Commands</strong> <strong>Reference</strong> <strong>Manual</strong> April 15, 2010

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!