AT Commands Reference Manual - wireless netcontrol GmbH

SMS
Notes:
Example
• A combination of discrete values or intervals can be entered for , for example,
"0,1,5,320-324,922".
• Parameter values must be entered in ascending order.
• The default value for missing is 0.
• Clear all might be done by one of the following commands: AT+CSCB=0 or
AT+CSCB=
• The string type lists may include only numbers (0-9), comma and minus (-)
characters.
• = 1-5 is equivalent to five channels.
• When is 1, and is a non empty list, items will be deleted from
the H24 list. Nothing will be done with item that does not exist in the H24 list.
• is always 0-255, all coding schemes are accepted - this setting cannot be
changed.
Testing the modes supported:
AT+CSCB=?
+CSCB: (0,1)
OK
Reading the current mid and lists:
AT+CSCB?
+CSCB: 0,"","0-255"
OK
Adding channels 3, 4,5,6,22 to mid list:
AT+CSCB=0,"3-6,22"
OK
AT+CSCB?
+CSCB: 0,"3-6,22","0-255"
OK
Removing channels 4 and 6 from channel list:
AT+CSCB=1,"4,6"
OK
AT+CSCB?
+CSCB: 0,"3,5,22","0-255"
OK
Clear all
AT+CSCB=0 / Or AT+CSCB=
OK
AT+CSCB?
+CSCB: 0,"","0-255"
OK
3-112 H24 - AT Commands Reference Manual April 15, 2010