14.03.2015 Views

AT Commands Reference Manual - wireless netcontrol GmbH

AT Commands Reference Manual - wireless netcontrol GmbH

AT Commands Reference Manual - wireless netcontrol GmbH

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Audio<br />

+CLVL: 5<br />

OK<br />

<strong>AT</strong>+CLVL=?<br />

+CLVL: (0-5)<br />

OK<br />

<strong>AT</strong>+CLVL=3<br />

OK<br />

+CMUT, Mute/Unmute Currently Active Microphone Path<br />

This command is used to mute/unmute the currently active microphone path by overriding the<br />

current mute state.<br />

Command Type Syntax Response/Action Remarks<br />

Set +CMUT= OK<br />

or:<br />

+CME ERROR: <br />

Read +CMUT? +CMUT: <br />

OK<br />

Test +CMUT=? +CMUT: (list of<br />

supported s)<br />

OK<br />

The Set command enables/disables<br />

uplink voice muting during a voice<br />

call.<br />

The Read command returns the current<br />

uplink voice mute/unmute state.<br />

The Test command returns the possible<br />

values.<br />

The following table shows the +CMUT parameters.<br />

Table 3-126: +CMUT Parameters<br />

<br />

Description<br />

0 Unmute microphone path<br />

1 Mute microphone path<br />

Example<br />

<strong>AT</strong>+CMUT=?<br />

+CMUT:(0-1)<br />

OK<br />

<strong>AT</strong>+CMUT?<br />

+CMUT: 0<br />

OK<br />

<strong>AT</strong>+CMUT=1<br />

OK<br />

<strong>AT</strong>+CMUT?<br />

+CMUT: 1<br />

OK<br />

<strong>AT</strong>+CMUT =2<br />

+CME ERROR: <br />

//uplink voice is unmuted<br />

//uplink voice is muted<br />

3-196 H24 - <strong>AT</strong> <strong>Commands</strong> <strong>Reference</strong> <strong>Manual</strong> April 15, 2010

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!