AT Commands Reference Manual - wireless netcontrol GmbH

Modem Configuration and Profile
The following table shows the Z parameters.
Table 3-167: Z Parameters
Description
0 Set to user profile 0
1 Set to user profile 1
The default value is 0.
Example
ATZ0
OK
&V, View Configuration
This command lists the user's profile configurations.
Command Type Syntax Response/Action Remarks
Execute &V ACTIVE PROFILE:
... (profile data)
STORED PROFILE 0:
... (profile data)
STORED PROFILE1:
... (profile data)
OK
or
+CME ERROR:
The Execute command displays the
current active configuration and stored
user profiles.
Example
AT&V ACTIVE PROFILE:
E1 Q0 V1 X1 &C2 &D2 &K3 &Y0
S000=000 S002=043 S003=013 S004=010 S005=008 S007=030
S008=002 S012=020 S024=003 S100=000 S102=000
STORED PROFILE 0:
E0 Q0 V0 X0 &C0 &D0 &K0
S000=003 S002=048 S003=013 S004=010 S005=030 S007=040
S008=006 S012=036 S024=009 S100=011 S102=050
STORED PROFILE 1:
E1 Q1 V1 X1 &C1 &D1 &K4
S000=001 S002=045 S003=013 S004=010 S005=046 S007=040
S008=012 S012=058 S024=016 S100=022 S102=100
3-248 H24 - AT Commands Reference Manual April 15, 2010