AT Commands Reference Manual - wireless netcontrol GmbH

Hardware Information
AT+CFUN?
+CFUN: 1
// Phone up with default (full) functionality.
AT+CFUN=4,1
Ok
//Disable phone transmit and receive RF circuits. Reset required
Phone restarted
AT+CFUN?
+CFUN: 4
// Phone "remembers" previous functionality
AT+CFUN=0
OK
// Disable RF operation. Disable SIM
AT+CFUN?
+CFUN: 0
Power cycling (By using Power cut, ON_N or IGN)
AT+CFUN?
+CFUN: 1
// returns to full functionality.
+ICF, DTE-DCE Character Framing
This command determines the local serial port start/stop (asynchronous) character framing used
by the DCE when accepting DTE commands and transmitting information text and result codes,
whenever these are not done automatically. Auto detect framing is not supported.
Command Type Syntax Response/Action Remarks
Set
+ICF=[[
,]]
OK
+CME ERROR:
The Set command determines the local
serial port start/stop character framing.
Read +ICF? +ICF:
,
+CME ERROR:
Test +ICF=? :+ICF:(list of
supported
values),(list of
supported
values)
+CME ERROR:
The Read command displays the
currently selected character framing.
The Test command displays a list of
supported and
values.
3-168 H24 - AT Commands Reference Manual April 15, 2010