AT Commands Reference Manual - wireless netcontrol GmbH

Chapter 3: AT Commands Reference
Command
Type Syntax Response/Action Remarks
Test AT+ TGFCC =? +TGFCC: (range of
supported
s),(range
of supported
s),(range of
supported
s),(range of
supported
s),(range of
supported s)
, (range of supported <
gsm_slot >s), (range of
supported
s).
OK
The following table shows the +TGFCC parameters.
Table 3-113: +TGFCC Parameters
Value Description
1-33 Output Power Level [dBm]
Value is according to Table 3-114.
0-3 0: 850 MHz
1: 900 MHz
2: 1800 MHz
3: 1900 MHz
0- 1023 The used channel according to the used band
(see Table 3-114)
[] 1-30 The transmit time in minutes.
0- infinity loop
Default 1 min.
[] 0-1 0 - GSM\GPRS transmits (MCS1).
1 - EDGE transmits (MCS8).
Default 0.
April 15, 2010 H24 - AT Commands Reference Manual 3-183