AT Commands Reference Manual - wireless netcontrol GmbH

Chapter 3: AT Commands Reference
ath
NO CARRIER
OK
atd9311234567;
OK
OK
+CCWA: "055728386",129,1,"",0
AT+CHLD=1
OK
NO CARRIER
OK
//Release the active call
//Originate a voice call
//Waiting call alerts
//Release the active call, accept the waiting call
//Active 9311234567 was released
//Waiting 055728386 was answered
+CCFC, Call Forwarding Number and Conditions
This command enables control of the call-forwarding supplementary service. Registration,
erasure, activation, deactivation, and status query are supported.
Command
Type
Syntax Response/Action Remarks
Set
+CCFC=,
[,[,[,
[,[,[,]]]]]]
If the command succeeds:
+CCFC:
,[,,
[,,[,]]][
+CCFC:
,[,,
[,,[,]]][...]]
Remarks
The Set command
instructs the H24
which call
forwarding settings
to request from
network. The Set
command, in query
mode, interrogates
the network about
the subscriber
current call
forwarding status.
Test +CCFC=? +CCFC: (list of supported s)
OK
The Test command
returns
values supported
by the H24 to the
terminal.
April 15, 2010 H24 - AT Commands Reference Manual 3-29