AT Commands Reference Manual - wireless netcontrol GmbH

Phonebook and Clock
The following table shows the +CPBS parameters.
Table 3-36: +CPBS Parameters
Description
List of supported phone books and their storage IDs
SM - SIM/UICC phone book.
LD - SIM/UICC last dialing phonebook.
DC - ME dialed calls list (+CPBW is not applicable for this storage).
EN - (*) Emergency numbers (+CPBW is not applicable for this storage).
FD - SIM Fixed dialing phone book.
MC - H24 missed (unanswered received) calls list (+CPBW is not applicable for this
storage).
ME - H24 phone book.
ON - SIM own numbers (MSISDNs) list (reading this storage is also available
through +CNUM).
RC - H24 received calls list (+CPBW is not applicable for this storage).
SD - Service dialing numbers.
The default phone book is ME.
Note: Last dialed number is saved in DC and LD phonebooks only after the call is
disconnected.
PIN2 code. Optional while select is "FD" only.
Integer type value indicating the number of used locations in selected memory.
Integer type value indicating the total number of locations in selected memory.
(*) Emergency numbers.
H24 supports - at least - the following emergency numbers: 911, 112, 000, 08, 110, 999, 118, and
119.
Only numbers found in the EN storage are considered as Emergency numbers. Besides the
numbers above, H24 can load emergency numbers to EN storage also from:
1. Emergency numbers file in SIM/USIM (set by operator)
2. Additional numbers configured by Motorola (Empty by default). Can be updated per
customer at manufacturing time.
Use the phonebook read command to view valid emergency numbers.
Example
AT+CPBS="ME"
OK
AT+CPBR=?
+CPBR: (1-500,40,255)
OK
AT+CPBR=1
OK
AT+CPBR=1,3 //There is nothing written in entry 1,2,3
OK
AT+CPBS="SM"
3-66 H24 - AT Commands Reference Manual April 15, 2010