AT Commands Reference Manual - wireless netcontrol GmbH

UI (User Interface)
atd035681234;
OK
AT+CIND?
+CIND: 5,4,1,1,0,0,1,3,1,0
OK
// voice call in alerting state
AT+CIND?
+CIND: 5,4,1,1,0,0,1,0,1,0
OK
// voice call is connected
// Message was received
AT+CPMS?
+CPMS: "SM",1,20,"SM",1,20,"SM",1,20
OK
AT+CIND?
+CIND: 5,4,1,0,0,0,1,0,1,1
OK
coverage no
AT+CIND?
+CIND: 5,0,0,0,0,0,0,0,1,1
OK
// Disconnect antenna - no signal strength, no Packet Service
service
+MIND, Motorola Indicator Control
This command enables/disables the following user indications to the TE:
• "SIM ready" - All commands interacting with the SIM are ready for use:
• Access commands: CRSM, CSIM
• SMS commands: CSCA, CMGW, CMGR …
• Phonebook commands: CPBR, CPBS …
• "Ready" - The unit is now capable of receiving data through the serial connection. This
indication is parallel to the DSR event.
• "SMS storage is full" - Incoming short messages storage is full. Indication is related to the
storage area set by CPMS.
• "RING" - RING indication
3-276 H24 - AT Commands Reference Manual April 15, 2010