AT Commands Reference Manual - wireless netcontrol GmbH

SMS
The following table shows the +CNMI parameters.
Table 3-53: +CNMI Parameters
Description
Determines incoming SMS unsolicited result code indication processing:
0 Buffer unsolicited result codes in the TA. If TA result code buffer is full,
indications can be buffered in some other place or the oldest indications may be
discarded and replaced with the new received indications (default).
1 Discard indication and reject new received message unsolicited result codes
when TA-TE link is reserved. Otherwise forward them directly to the TE.
2 Buffer unsolicited result codes in the TA when TA-TE link is reserved and
flush them to the TE after reservation. Otherwise forward them directly to the
TE.
Determines SMS-Deliver indication report:
0 No SMS-DELIVER indications are routed to the TE (default)
1 If SMS-DELIVER is stored in the H24, the memory location indication is
routed to the TE using the following unsolicited result code (see Table 3-55): +CMTI:
,
+CMTI and parameters are described below.
2 SMS-DELIVERs are routed directly to the TE using the following unsolicited
result code ((+CMT parameters are described in Table 3-56).
PDU Mode:
+CMT: [],
TEXT Mode:
When +CSDH=0:
+CMT:,,
When +CSDH=1:
+CMT:,[],,,,,,
,,
Determines Cell broadcast indication report:
0 No CBM indications are routed to the TE (default)
2 Received CBMs are routed directly to the TE using unsolicited result code
(+CBM parameters are described in Table 3-59).
PDU Mode:
+CBM:
Text Mode:
+CBM
:,,,,
3-92 H24 - AT Commands Reference Manual April 15, 2010