AT Commands Reference Manual - wireless netcontrol GmbH

Access
Command
Type Syntax Response/Action Remarks
Set
+CLCK=,
[,
[,]]
For where
is irrelevant
(SC, FD):
+CLCK=,2
+CLCK:
For with several
supported es:
+CLCK=,2
+CLCK:
,
[+CLCK:
,
[…]]
OK
The Set command performs the
specified action on the
specified .
Test +CLCK=? +CLCK: (list of
supported s)
The Test command returns the list of
supported facilities.
The following table shows the +CLCK parameters.
Table 3-147: +CLCK Parameters
Description
SC SIM Card PIN setting
0 Disable PIN
1 Enable PIN)
FD SIM Fixed Dialing memory setting
0Disable fixed dialing feature
1Enable fixed dialing feature)
AO BAOC (Bar All Outgoing Calls)
OI BOIC (Bar Outgoing International Calls)
OX BOIC-exHC (Bar Outgoing International Calls except to Home Country)
AI BAIC (Bar All Incoming Calls)
IR BIC-Roam (Bar Incoming Calls when Roaming outside the home country)
AB All Barring services (applicable only for =0)
AG All outgoing barring services (applicable only for =0)
AC All incoming barring services (applicable only for =0)
PN Network Personalization
PU Network subset Personalization
PP Service Provider Personalization
PC Corporate Personalization
PF Lock phone to the very first inserted SIM/UICC card
String type, 4-8 character password
3-222 H24 - AT Commands Reference Manual April 15, 2010