AT Commands Reference Manual - wireless netcontrol GmbH

Chapter 3: AT Commands Reference
Table 3-142: SIM Card Errors
Error
Description
46 corporate personalization PIN required ME is waiting for PC PERSONALIZATION PIN to
be entered.
47 corporate personalization PUK required PC PERSONALIZATION PIN is blocked, ME is
waiting for PC PERSONALIZATION PUK to be
entered.
Command
Type Syntax Response/Action Remarks
Set
AT+CPIN=
or ,
[]
OK
or:
+CME ERROR:
The Set command sends the password to
the H24 that is necessary before it can be
operated (SIM PIN or SIM PUK). The Set
command supplies to MS the code (SIM
PIN or SIM PUK) corresponding to the
error code required or returned as the
result of the Read command. For example,
if the SIM PIN is locked, the error code 11
or "SIM PIN required" is returned. The
user must then issue the Set command with
the SIM PIN.
Read AT+CPIN? +CPIN:
OK
or:
+CME ERROR:
The Read command returns an
alphanumeric string indicating the status
of the SIM card, and whether a password is
required or not. This is an independent
SIM card lock status check only, and does
not check the phone lock status.
Test AT+CPIN=? OK
or:
+CME ERROR:
The following table shows the +CPIN parameters.
Table 3-143: +CPIN Parameters
Description
PUK code for unblocking a blocked phone
Current PIN for unlocking a locked phone
New PIN (after changing or after entering PUK) 4 - 8 digits
Note: This parameter is irrelevant for personalization since personalization PIN
is unchangeable.
April 15, 2010 H24 - AT Commands Reference Manual 3-213