14.03.2015 Views

AT Commands Reference Manual - wireless netcontrol GmbH

AT Commands Reference Manual - wireless netcontrol GmbH

AT Commands Reference Manual - wireless netcontrol GmbH

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Chapter 3: <strong>AT</strong> <strong>Commands</strong> <strong>Reference</strong><br />

In Multi channel mode, this command is allowed on the control channel only.<br />

Command<br />

Type Syntax Response/Action Remarks<br />

Set +MDSI= OK<br />

or<br />

+CME ERROR: <br />

Read +MDSI? +MDSI: [,, ,<br />

, ]<br />

OK<br />

or<br />

+CME ERROR: <br />

Test +MDSI=? +MDSI: (list of supported s)<br />

OK<br />

or<br />

+CME ERROR: <br />

The following is the available<br />

mode values for the Set command:<br />

= 1 - enables the<br />

sending of the unsolicited<br />

result code: +MDSI:<br />

[,, ,<br />

, ] to<br />

the TE.<br />

= 0 - No unsolicited<br />

message is sent to the TE.<br />

The Read command queries<br />

the current settings for<br />

.<br />

If reject cause has been<br />

received prev. to the read<br />

command , ,<br />

, will<br />

also be displayed.<br />

The Test command returns<br />

the possible values.<br />

The following table shows the +MDSI parameters.<br />

Table 3-184: +MDSI Parameters<br />

<br />

Description<br />

0 Unsolicited indications off<br />

1 Unsolicited indications on<br />

April 15, 2010 H24 - <strong>AT</strong> <strong>Commands</strong> <strong>Reference</strong> <strong>Manual</strong> 3-279

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!