AT Commands Reference Manual - wireless netcontrol GmbH

Chapter 3: AT Commands Reference
The following table shows the indication parameters.
Table 3-210: +MIPSTAT Parameters
Description
SocketStatus
A unique number that identifies a socket in 1-20 range.
0 - ACK indication
1 - Network error
2 - Timeout occurred
3 - Reset from remote side
4 - Closed by remote side
5 - Connection closed automatically due to non-fatal
alert
NumberOfAcknowledgedBytes Total number of bytes that were acknowledged 1
Note: 1 ) In case of SSL secured connection, the encryption increases the amount of data and
SSL protocol uses encrypted alerts, therefore the
parameter shows gross number of acknowledged bytes (including encrypted alert
messages), which is greater than actual amount of sent user data.
Example
AT+MIPOPEN=1,8,1050,"www.google.com",80,0
+MIPOPEN: 1,8,1
OK
+MIPSTAT: 1,4
+MIPDATA, Network Incoming Data Unsolicited Indication in
Pseudo-command Mode
This unsolicited indication is sent to the terminal indicating a data comes from Network when the
module is in Pseudo-Command Mode, see MIP Commands Using Cases / Online Data Mode
Socket Behavior for more description.
Unsolicited indication format
+MIPDATA: ,
April 15, 2010 H24 - AT Commands Reference Manual 3-341