AT Commands Reference Manual - wireless netcontrol GmbH

Chapter 3: AT Commands Reference
The following table shows the +MCI parameters.
Table 3-88: +MCI Parameters
Description
The requested parameters mask to report for GSM:
Word bit mask reflects GSM cell parameters, selected by user to be reported:
LSB
bit 0: ARFCN
bit 1: BSIC
bit 2: Cell ID
bit 3: SS
bit 4: SQ
bit 5: C1
bit 6: C2
bit 7: C31
bit 8: C32
bit 9: TA
bit 10 - bit 15: Unused
MSB
Mask is input in decimal format.
If this parameter is omitted, all GSM cell parameters are reported in the answer on Set
command. Default values (all parameters are requested) - 1023.
The requested parameters mask to report for WCDMA:
Word bit mask reflects WCDMA cell parameters, selected by user to be reported:
LSB
bit 0: UARFCN
bit 1: Cell ID
bit 2: PSC
bit 3: RSCP
bit 4: Ec/No
bit 5 - bit 15: Unused
MSB
Mask is input in decimal format.
If this parameter is omitted, all WCDMA cell parameters are reported in the answer
on Set command. Default values (all parameters are requested) - 31.
Radio Access Technology:
"2G" - GSM cell parameters report
"3G" - WCDMA cell parameters report
String parameter.
Absolute Radio Frequency Channel Number.
Ranges:
Band 1900: 1-124
Band 1800: 512-885
Band 850: 128-251
Band 900: 975-1023
Base Station Identity Code
Range: [0 - 3F]
April 15, 2010 H24 - AT Commands Reference Manual 3-145