14.03.2015 Views

AT Commands Reference Manual - wireless netcontrol GmbH

AT Commands Reference Manual - wireless netcontrol GmbH

AT Commands Reference Manual - wireless netcontrol GmbH

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Chapter 3: <strong>AT</strong> <strong>Commands</strong> <strong>Reference</strong><br />

Command<br />

Type Syntax Response/Action Remarks<br />

Read +MACTXG? +MACTXG:<br />

OK<br />

Test +MACTXG=? +MACTXG: <br />

Reads codec tx gain for the active<br />

audio mode.<br />

These values will define the range for<br />

the set command.<br />

The following table shows the +MACTXG parameters.<br />

Table 3-134: +MACTXG Parameters<br />

<br />

<br />

tx_gain_min (0) - tx_gain_max (65535)<br />

the value in decimal<br />

Description<br />

Example<br />

<strong>AT</strong>+MACTXG=?<br />

+MACTXG: (0-65535)<br />

<strong>AT</strong>+MACTXG= 2048<br />

+MAMOD, Select Audio Mode<br />

This command selects the active audio mode. The active audio mode determines the current<br />

microphone and speaker in use. Voice and alert may be routed to different speakers.Value is saved<br />

in NVM.<br />

Note: +MAMOD set command is disabled while <strong>AT</strong>+MAHSD=1 or <strong>AT</strong>+MAHSD=2 and a<br />

Headset is detected.<br />

Command<br />

Type Syntax Response/Action Remarks<br />

Set +MAMOD= OK<br />

or:<br />

+CME ERROR: <br />

Read +MAMOD? +MAMOD:<br />

Returns the active audio mode.<br />

OK<br />

Test +MAMOD=? +MAMOD: <br />

April 15, 2010 H24 - <strong>AT</strong> <strong>Commands</strong> <strong>Reference</strong> <strong>Manual</strong> 3-203

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!