AT Commands Reference Manual - wireless netcontrol GmbH

Chapter 3: AT Commands Reference
Note: Any unused bits will be set to 0.
Table 3-70: of SMS-DELIVER Message
Bit/s Reference Description
0-1 Message-Type-Indicator Parameter describing the message type.
0 0 SMS-DELIVER (in the direction SC
to MS)
2 TP-More-Message-To-Send Parameter indicating whether or not more
messages are waiting to the MS in the
SC.
0 More messages are waiting for the MS
in this SC.
1 No more messages are waiting for the
MS in this SC.
5 TP-Status-Report-Indication Parameter indicating if a status report is
requested by the MS
0 A status report is not requested
1 A status report is requested
6 TP-User-Data-Header-Indicator Parameter indicating whether or not a
status report will be returned to the SME.
0 A status report will not be returned to
the SME.
1 A status report will be returned to the
SME.
7 TP-Reply-Path Parameter indicating that Reply Path is
set or not.
0 TP-Reply-Path parameter is not set.
1 TP-Reply-Path parameter is set.
Table 3-71: of SMS-STATUS-REPORT Message
Bit/s Reference Description
0-1 Mandatory:
Message-Type-Indicator
2 Mandatory:
TP-More-Message-To-Send
Parameter describing the message type.
1 0 SMS-STATUS-REPORT (in the
direction SC to MS)
Parameter indicating whether or not more
messages are waiting to the MS in the
SC.
0 More messages are waiting for the MS
in this SC
1 No more messages are waiting for the
MS in this SC
April 15, 2010 H24 - AT Commands Reference Manual 3-117