AT Commands Reference Manual - wireless netcontrol GmbH

AT Commands Summary
Table 1-1: AT Commands (Cont.)
AT Command Description Page
+CPWD This command sets a new password for the facility lock. Page 3-220
+CLCK
+MCTYPE
+MGSMSIM
This command locks, unlocks or interrogates a H24 or a network
facility .
This AT command queries the card type currently used by H24 (SIM
card or USIM card).
This command adjusts the H24 to work with a 2G SIM or a 3G SIM
card types.
Page 3-221
Page 3-224
Page 3-225
Personalization Commands
+MRPERSO
This command restores the configuration of personalization from a
backup partition and overrides the existing configuration if exits.
Note: The commands: +CPIN, +CLCK and +TPIN are common to
the personalization as well as to other locking facilities of the H24.
Page 3-226
FOTA Commands
+MFOTAWSCF
G
This command sets the Web-Session default entry. Page 3-228
+MFOTACNFG
This command enables setting the DM session as
Automatic/Non-Automatic (i.e. Transparent/Non-Transparent).
Page 3-229
+MFOTAREQ This command sends FOTA requests toward DTE. Page 3-230
+MFOTARSP This command is used to send response to +MFOTAREQ reports. Page 3-232
+MFOTAINSTL Installs the updated package. Page 3-233
+MFOTAABOR
T
Aborts the DM session. Page 3-233
+MFOTAIND This command sends Unsolicited FOTA indications toward DTE. Page 3-234
Modem Configuration and Profile
Modem Register Commands
V
Q
E
X
Sn
This command determines the response format of the data adapter
and the contents of the header and trailer transmitted with the result
codes and information responses.
This command determines whether to output/suppress the result
codes.
This command defines whether the H24 echoes the characters
received from the user, (whether input characters are echoed to
output).
This command defines the data adaptor response set, and the
CONNECT result code format.
This command reads/writes values of the S-registers, and includes
registers 1-49, 94, 96 (Audio) and 102 (Sleep mode).
\S This command displays the status of selected commands and
S-registers.
Page 3-239
Page 3-240
Page 3-241
Page 3-242
Page 3-243
Page 3-246
1-26 H24 - AT Commands Reference Manual April 15, 2010