AT Commands Reference Manual - wireless netcontrol GmbH

A-GPS
The following table shows the +MGPSURL parameters.
Table 3-223: +MGPSURL Parameters
Description
String
0-65535
Context id number set by AT+CGDCONT
Example
AT+CGDCONT=1,"IP","internet.pelephone.net.il"// Define
OK
AT+MGPSURL=1,"supl.nokia.com",7275// Set Context id, URL and Port
OK
+MGPSSUPL, Set User Plane Security
Using a secure connection in User Plane protocol requires enabling it explicitly by this AT
command and having a matching certificate for the SUPL server.
Command Type Syntax Response/Action Remarks
Set AT+MGPSSUPL = OK
or:
+CME ERROR:
Read AT+MGPSSUPL? +MGPSSUPL:
OK
Test AT+MGPSSUPL =? +MGPSSUPL: (list of
supporteds)
The following table shows the +MGPSSUPL parameters.
Table 3-224: +MGPSSUPL Parameters
Description
0 - OFF - No security algorithm is used (normal
TCP/IP - default)
1 - ON
The above setting is saved through power cycle.
Configuration change will affect the next GPS session.
SUPL Certificate
The customer should supply the certificate to Motorola to be placed in H24 for his development
phase and production. For this purpose please contact customer care.
H24 may support secure handshaking and SUPL without the need for AGPS SUPL Server Root
CA (SUPL certificate). H24 uses default certificate and as long as it is not receiving SSL Fatal
3-358 H24 - AT Commands Reference Manual April 15, 2010