14.03.2015 Views

AT Commands Reference Manual - wireless netcontrol GmbH

AT Commands Reference Manual - wireless netcontrol GmbH

AT Commands Reference Manual - wireless netcontrol GmbH

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Appendix A: <strong>Reference</strong> Tables<br />

This appendix contains the following sections:<br />

• <strong>AT</strong> <strong>Commands</strong> Alphabetical Summary, below<br />

• Character Set Table CS1: (GSM -> UCS-2), Page -A-11<br />

• Character Set Table CS2: (GSM -> IRA), Page -A-15<br />

• Character Set Table CS3: (UCS-2 full table), Page -A-20<br />

• Character Set Table CS4: (IRA Table), Page -A-20<br />

Note: Character Set Table CS3: (UCS-2) is provided on CD due to its size.<br />

<strong>AT</strong> <strong>Commands</strong> Alphabetical Summary<br />

The following table contains an alphabetical list of all the H24 <strong>AT</strong> commands.<br />

Table A-1: <strong>AT</strong> <strong>Commands</strong> (Alphabetical)<br />

<strong>AT</strong> Command Description Page<br />

\S This command displays the status of selected commands and<br />

S-registers.<br />

Page 3-246<br />

&C<br />

&D<br />

This command determines how the state of the DCD line relates to<br />

the detection of the received line signal from the distant end.<br />

This command determines how the H24 responds when the DTR<br />

(Data Terminal Ready) status is changed from ON to OFF during<br />

the online data state.<br />

Page 3-161<br />

Page 3-163<br />

&F This command restores the factory default configuration profile. Page 3-247<br />

&K This command configures the RTS/CTS flow control. Page 3-160<br />

&V This command lists the user's profile configurations. Page 3-248<br />

&W This command stores the user profile configuration to the NV. Page 3-249<br />

&Y This command sets the user profile to the power up configuration. Page 3-250<br />

+CALM This command handles the selection of the H24’s alert sound mode. Page 3-197<br />

+CBAUD This command sets the baud rate. Page 3-157<br />

+CBC This command queries the battery charger connection. Page 3-156<br />

+CBM This unsolicited message forwards the SMS upon its arrival. Page 3-93<br />

April 15, 2010 H24 - <strong>AT</strong> <strong>Commands</strong> <strong>Reference</strong> <strong>Manual</strong> A-1

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!