AT Commands Reference Manual - wireless netcontrol GmbH

UI (User Interface)
The following table shows the +CSIM parameters.
Table 3-181: +CSIM Parameters
Description
Integer type. Length of the characters that are sent to TE in or
string (two times the actual length of the or ).
Command passed on by the MT to the SIM in the format as described in GSM 51.011.
Hexadecimal character format.
Maximum length: 520 characters (260 bytes).
Response to the command passed on by the SIM to the MT in the format as described
in GSM 51.011. Hexadecimal character format.
Maximum length: 516 characters (258 bytes).
Note: Hexadecimal characters in and are uppercase.
Example
// Read record 1 in EF ADN (6F3A) in UICC card.
AT+CSIM=14,"00A40004027F10" // SELECT DF TELECOM
+CSIM: 4,"6122"
// Command successful.
OK
AT+CSIM=14,"00A40004026F3A" // SELECT EF ADN
+CSIM: 4,"6120"
// Command successful.
OK
AT+CSIM=10,"00B201041E" // READ RECORD 1, 0x1E length.
+CSIM: 64,"4245545441FFFFFFFFFFFFFFFFFFFFFF06913355555555FFFFFFFFFFFFFF9000"
// Command successful. Response length is 32 bytes including status words.
OK
+CIND, Indicator Control
This command is used to query the status of various ME indicators.
Command
Type Syntax Response/Action Remarks
Read AT+CIND? +CIND:,…. Read command returns the
status of ME indicators.
Test AT+CIND=? +CIND:(,(list of supported
s)),(,(list of
supporteds))…
Test command returns pairs,
where string value is
a short description of the indicator
and compound value is
the allowed values for the
indicator.
3-274 H24 - AT Commands Reference Manual April 15, 2010