AT Commands Reference Manual - wireless netcontrol GmbH

Chapter 3: AT Commands Reference
ath
NO CARRIER
OK
atd>1;
//Speed dial from phonebook
OK // call to number- 035659090
OK
ath
NO CARRIER
OK
atd>501;
+CME ERROR: not found //there is no number on index 501 or with name - 501
atd>505;
OK // call to number- 0576750228
OK
ath
NO CARRIER
OK
DL, Dial Last Number
The DL command places a data/voice call to the last number dialed. The call progress
information (success/failure) is reported in the same way as for the Dial command. (Refer to “D,
Dial Command”, page 3-11).
The format of the command is provided below:
Command
ATDL[;]
VOICE CALL:
1st response - Voice call place begins
OK
2nd response - Voice call connected:
OK
Detailed Description
DATA/FAX:
2nd response only - Data/Fax call connected
CONNECT or CONNECT result code (: speed of connection,
depends on ATX value).
April 15, 2010 H24 - AT Commands Reference Manual 3-15