AT Commands Reference Manual - wireless netcontrol GmbH

B - B Index
+CSSN, Supplementary Service Notifications, 3-48
+CUSD, Unstructured Supplementary Service Data, 3-51
+EPIN, Enter SIM PIN2 to Verify PIN2 Indicator, 3-216
+FCLASS, Select Mode, 3-58
+FMI, Request Manufacturer ID, 3-1
+FMM, Request Model ID, 3-2
+FMR, Request Revision, 3-3
+FRH, Receive DATA with HDLC Frame, 3-64
+FRM, Receive Data, 3-62
+FRS, Receive Silence, 3-59
+FTM, Transmit Data, 3-60
+FTS, Transmit Silence, 3-59
+GMI, Request Manufacturer ID, 3-1
+GMM, Request Model ID, 3-2
+GMR, Request Revision, 3-3
+GSN, Request Product Serial Number Identification, 3-3
+ICF, DTE-DCE Character Framing, 3-168
+IPR, Local DTE-DCE Serial Port Rate, 3-158
+MCI, Motorola Cell Information, 3-144
+MCWAKE, GPRS Coverage, 3-164
+MDC, Selection of Desired Message to Be Displayed
Upon Connection of a Voice Call, 3-33
+MIOC, Motorola I/O Configure, 3-171
+MIOD, Motorola I/O Define, 3-173
+MIPCALL, Create a Wireless Link, 3-315
+MIPCLOSE, Close a Socket, 3-323
+MIPDATA, Network Incoming Data Unsolicited Indication
in Pseudo-command Mode, 3-341
+MIPFLUSH, Flush Data from Buffers, 3-331
+MIPOPEN, Open a Socket (UDP or TCP), 3-318
+MIPPUSH, Push Data into Protocol Stack, 3-329
+MIPRTCP, Receive Data from TCP Protocol Stack,
3-339
+MIPRUDP, Receive Data from UDP Protocol Stack,
3-340
+MIPSEND, Send Data, 3-327
+MIPSSL, SSL Alerts Unsolicited Report, 3-350
+MIPSTAT, Status Report, 3-340
+MMGL, List Messages, 3-104
+MMGR, Read Message, 3-100
+MPING, Start Ping Execution (ICMP Protocol), 3-342
+MPINGSTAT, Status Update for +MPING Execution,
3-346
+MSCTS, Enable/Disable CTS During Wakeup Period,
3-257
+MTTY, Motorola TTY Configuration, 3-43
+MVC, Motorola Vocoders Configuration, 3-42
+MVREF, Motorola Voltage Reference, 3-180
+TPIN, Query Number of Remaining SIM PIN/PUK Entering
Attempts, 3-217
A, Answer Incoming Call, 3-18
A/, Repeat Last Command, 3-211
Access Control Commands, 3-211
AT, Check AT Communication, 3-211
Call Control, 3-9, 3-11
Capability Reporting, 3-8
CGPADDR, GPRS ADDResses, 3-301
D, Dial, 3-11
D*99, Request GPRS Service "D", 3-297
Directory Access Commands, 3-65
DL, Dial Last Number, 3-15
E, Command Echo, 3-241
Error Handling Commands, 3-259
Fax Class 1, 3-57
Fax Commands, 3-58
H, Hang-up Call, 3-16
Hardware Information, 3-156
I, Request Identification Information, 3-6
MIPSETS, Set Size for Automatic Push, 3-325
MIPXON, Flow Control - Xoff, 3-338
MIPXON, Flow Control - Xon, 3-339
Modem ID, 3-1
Modem Register Commands, 3-239
Network Commands, 3-126
O, Return to Online Data State, 3-39
Q, Result Code Suppression, 3-240
S, Bit Map Registers, 3-243
S, Show the Status of the Commands and S-Registers in Effect,
3-246
S102, Set Delay Before Sending Data to the Terminal,
3-255
S24, Set Number of Seconds Delay before H24 Enters
Sleep Mode, 3-255
Sleep Mode Commands, 3-251
SMS Commands, 3-75
Subscriber Unit Identity, 3-1
System Date and Time Access Commands, 3-72
TCP/IP, 3-314
UI, 3-271
Unsolicited UI Status Messages, 3-282
V, H24 Response Format, 3-239
X, Result Code Selection and Call Progress Monitoring
Control, 3-242
Z, Reset to Default Configuration, 3-247
AT Commands Summary, 1-19, A-1
AT Commmands Reference
+CSCS, Select Terminal Character Set, 3-4
AT Communication
Check, 3-211
Audio, 1-8, 3-194
Features and Benefits, 1-9
Overview, 1-8
Technical Description, 1-9
Automatic Push
Set Size, 3-325
B
Battery
Charger Connection, 3-156
Baud Rate Regulation, 3-157
Bearer
Select, 3-36
Bit Map Registers, 3-243
Buffers
Flush Data, 3-331
April 15, 2010 H24 - AT Commands Reference Manual Index-2