AT Commands Reference Manual - wireless netcontrol GmbH

GPRS/EDGE/UMTS
parameters before socket activation or when the socket is in active state. Configuration values
will be stored in the module until power circle.
Command Type Syntax Response/Action Remarks
Set
AT+MIPCONF 1 = 2
[,[],[],[],
[]
[,]
[,]
[,]
[,]
[,]
[,]]
OK
Or
ERROR [] 3
Read AT+MIPCONF? +MIPCONF:
1,,,,
,,
< KeepAliveTimeout >,
< KeepAliveInterval >,
< KeepAliveProbes >
+MIPCONF:
2,,,,
,,
< KeepAliveTimeout >,
< KeepAliveInterval >,
< KeepAliveProbes >,
< RcvBuf >,
< SAck >
.
.
.
+MIPCONF:
20,,,,
,,
< KeepAliveTimeout >,
< KeepAliveInterval >,
< KeepAliveProbes >
< RcvBuf >,
< SAck >
Test AT+MIPCONF=? +MIPCONF:
(1-20),(1-10),(1-10),(10-1200),(1-1200),
(0-2),(0-18000),(1-18000),(1-10)),
(16-63),(0-1)
OK
Note: 1 ) If any command's argument (except ) is missing in the Set command, the
missing argument value will be set to the last configured value. If the missing argument
is not configured yet the missing arguments values will be set to its default value.
2 ) The Set command will return ERROR indication if argument is absence.
3-334 H24 - AT Commands Reference Manual April 15, 2010