AT Commands Reference Manual - wireless netcontrol GmbH

Chapter 4: Using the Commands
Setting TEXT Mode Parameters (Using AT+CMGW and
AT+CMGS)
AT+CSMP?
+CSMP=17,167,0,0
OK
AT+CMGW="0544565034"
> text is entered
+CMGW: 141
OK
AT+CSDH=1
OK
AT+CMGR=141
+CMGR: "STO UNSENT","0544565034",,,129,17,0,0,167,"+ 97254120032",145,
AT+CSMP= 1,256,0,0
+CMS ERROR: numeric parameter out of bounds
Writing, Saving and Sending Messages (Using AT+CMGW
and AT+CMSS)
Writing messages into the database, with or without destination address. In TEXT mode, the
header parameters will be set according to CSMP settings:
AT+CMGW
//Writing a message without destination address
> message text
+CMGW: 142
OK
AT+CMGW="054565132" //Writing a message with destination address
> message text
+CMGW: 143
OK
:
AT+CMSS=143
//Send a message to the destination address with which it was stored,
using the message index
OK
AT+CMSS=143,"054565029" //Send a message to a destination address, regardless of the
destination address with which it was stored (if any), using the message index
OK
AT+CMSS=3,"054565029" //In this way, received messages (stored in the inbox) can also be sent
OK
AT+CSMP=25,"05/03/15,21:22:23+08"
OK
AT+CMGW="0544565034"
A
+CMGW: 129
OK
AT+CMGR=129
+CMGR: "STO UNSENT", "0544565034",,129,25,0,0,"05/03/15,21:22:23+08","+972521100059",145,1
A
OK
April 15, 2010 H24 - AT Commands Reference Manual 4-9