AT Commands Reference Manual - wireless netcontrol GmbH

Appendix A: Reference Tables
+MCI
+MCICFG
+MCONN
+MCTYPE
+MCWAKE
+MDC
+MDSI
+MFOTAABOR
T
+MFOTACNFG
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command Description Page
This command reports to TE information of a current serving cell
and neighbor cells.
This command Enables/Disables Motorola Cell Information process
(cell data gathering on background and MCI request).
This command allows switching between listed connectivity
configurations.
This AT command queries the card type currently used by H24 (SIM
card or USIM card).
This command displays reports on the status of the GPRS/GSM
coverage.
This AT command enables you to select the desired messages to be
displayed upon connection of a voice call with a remote party.
This command enables unsolicited reporting of indications of SIM
deactivation and invalidation. The indications include the cause for
deactivation and invalidation.
Page 3-144
Page 3-148
Page 3-376
Page 3-224
Page 3-164
Page 3-33
Page 3-278
Aborts the DM session. Page 3-233
This command enables setting the DM session as
Automatic/Non-Automatic (i.e. Transparent/Non-Transparent).
Page 3-229
+MFOTAIND This command sends Unsolicited FOTA indications toward DTE. Page 3-234
+MFOTAINSTL Installs the updated package. Page 3-233
+MFOTAREQ This command sends FOTA requests toward DTE. Page 3-230
+MFOTARSP This command is used to send response to +MFOTAREQ reports. Page 3-232
+MFOTAWSCF
G
This command sets the Web-Session default entry. Page 3-228
+MFTM This command is used to enter and exit FTM mode. Page 3-181
+MGPSAPWR Set Antenna Mode. Page 3-369
+MGPSECALL GPS behavior in emergency call. Page 3-368
+MGPSLOC Location request and report. Page 3-361
+MGPSMODE Positioning mode configuration. Page 3-355
+MGPSMOLR Enables assistance data and/or location estimates. Page 3-367
+MGPSPROTO
COL
Positioning assisted protocol configuration. Page 3-356
+MGPSQOS Set QoS parameters. Page 3-364
+MGPSSUPL Set user plane security. Page 3-358
+MGPSTTFF This command sets/gets TTFF mode. Page 3-359
+MGPSURL Set user plane server parameters. Page 3-357
April 15, 2010 H24 - AT Commands Reference Manual A-7