AT Commands Reference Manual - wireless netcontrol GmbH

SMS
The following table shows the +CMGL/+MMGL parameters.
Table 3-61: +CMGL/+MMGL Parameters
Description
Index in storage of the message. to be retrieved.
Status of message in memory:
PDU mode Text mode Description
0 “REC UNREAD” Received unread messages (default)
1 “REC READ” Received read messages
2 “STO UNSENT” Stored unsent messages
3 “STO SENT” Stored sent message
4 “ALL” All messages
Original/destination address.
Message contents in text mode.
In PDU mode: Size of message, in octets, excluding SMSC data.
In TEXT mode: Number of characters included in .
Message header and contents in PDU mode format. See description in “+CMGR,
+MMGR, Read Message” on page 3-100.
Type of origination address / destination address
First octet of the SM
Message reference
Recipient-Address
Type Of Recipient-Address
Service center time stamp
Message serial number
Message ID
Current page number
Total number of pages
Discharge-Time
Status
Example
AT+CMGL=?
+CMGL: ("REC UNREAD","REC READ","STO UNSENT","STO SENT","ALL")
OK
3-106 H24 - AT Commands Reference Manual April 15, 2010