14.03.2015 Views

AT Commands Reference Manual - wireless netcontrol GmbH

AT Commands Reference Manual - wireless netcontrol GmbH

AT Commands Reference Manual - wireless netcontrol GmbH

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Audio<br />

+MANS, Noise Suppression Control<br />

This command enables/disables NS for the active audio mode. Value is saved in NVM.<br />

Command<br />

Type Syntax Response/Action Remarks<br />

Set +MANS = OK<br />

or:<br />

+CME ERROR: <br />

Read +MANS? + MANS:<br />

OK<br />

Test +MANS =? +MANS: <br />

The following table shows the +MANS parameters.<br />

Table 3-139: +MANS Parameters<br />

<br />

Description<br />

<br />

0 - NS off<br />

1 - NS on<br />

Note: When EC type is OFF (+MAEC=0), noise will not be suppressed even if +MANS=1, due<br />

to H24 limitation.<br />

+MAST, Sidetone Control<br />

This command enables/disables sidetone for the active audio mode. Sidetone gain can be<br />

configured by +MAGAIN command. Value is saved in NVM.<br />

Command<br />

Type Syntax Response/Action Remarks<br />

Set +MAST = OK<br />

or:<br />

+CME ERROR: <br />

Read +MAST? + MAST:<br />

OK<br />

Test +MAST =? +MAST: <br />

3-208 H24 - <strong>AT</strong> <strong>Commands</strong> <strong>Reference</strong> <strong>Manual</strong> April 15, 2010

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!