ARUP; ISBN: 978-0-9562121-5-3 - CMBBE 2012 - Cardiff University

8. REFERENCES
1. Frobin W., Brinckmann P., Kramer M. and Hartwig E., Height of lumbar discs
measured from radiographs compared with degeneration and height classified from
MR images, Europ. Radio., 2001, Vol. 11, 263-269
2. Adams M.A., Mc Nally D.S. and Dolan P., ‘Stress’ distributions inside
intervertebral discs. The effects of age and degeneration., J. Bone and Joint Surg.,
1996, Vol. 78, 965-972
3. Cao K.D., Grimm M.J. and Yang K.H., Load sharing within a human lumbar
vertebral body using the finite element method, Spine, 2001, Vol. 26, E253-E260
4. Kayanja M.M., Ferrara L.A., Lieberman I.H., Distribution of anterior cortical shear
strain after a thoracic wedge compression fracture, The Spine J., 2004, Vol. 4, 76-87
5. Lu Y.T., Rosenau E., Paetzold H., Klein A., Püschel K., Morlock M.M., Huber G.,
Investigation of strain changes on cortical shell due to spinal degeneration – A
parametric study using a finite element spinal model validated by strain
measurements. (in preparation)
6. Rohlmann A., Zander T., Schmidt H., Wilke H.-J. and Bergmann G., Analysis of the
influence of disc degeneration on the mechanical behaviour of a lumbar motion
segment using the finite element method, J. Biomech., 2006, Vol. 39, 2484–2490
7. Schmidt H., Kettler A., Heuer F., Simon U., Claes L. and Wilke H.-J., Intradiscal
Pressure, Shear Strain, and Fiber Strain in the Intervertebral Disc Under Combined
Loading, Spine, 2007, Vol. 32, No. 7, 748–755
8. Burstein A.H., Reilly D.T. and Martens M., Aging of bone tissue: mechanical
properties, J. of Bone and Joint Surg., 1976, American Vol. 58, 82-86
9. Lindahl O., Mechanical Properties of Dried Defatted Spongy Bone, Acta
Orthopaedica, 1976, Vol. 47, 11-19
10. Shirazi-Adl S.A., Shrivastava S.C. and Ahmed A.M., Stress Analysis of the Lumbar
Disc-Body Unit in Compression. A Three-Dimensional Nonlinear Finite Element
Study, Spine, 1984, Vol. 9, 120-134
11. Noailly J., Wilke H.-J., Planell J.A., Lacroix D., How does the geometry affect the
internal biomechanics of a lumbar spine bi-segment finite element model?
Consequences on the validation process, J. Biomech., 2007, Vol. 40, 2414–2425
12. Yamada H., Evans F.G., Strength of biological materials, Williams & Wilkins, 1970
13. Lavaste F., Skalli W., Robin S., Roy-Camille R. and Mazel C., Three-dimensional
geometrical and mechanical modelling of the lumbar spine, J. Biomech., 1992,
Vol. 25, 1153-1164
14. Tyndyk M.A., Barron V., McHugh P.E., O’Mahoney D., Generation of a finite
element model of the thoracolumbar spine, Acta of Bioeng. and Biomech., 2007,
Vol. 9, No. 1, 207
15. Ruberte L.M., Natarajan, R.N., Andersson G.B., Influence of single-level lumbar
degenerative disc disease on the behavior of the adjacent segments – A finite
element model study, J.Biomech., 2009, Vol. 42, 341-348.
16. Kurutz M., Oroszváry L., Finite element analysis of weightbath hydrotraction
treatment of degenerated lumbar spine segments in elastic phase, J. Biomech., 2010,
Vol. 43, 433-441
17. Polikeit A., Nolte L.P., Ferguson S.J., Simulated influence of osteoporosis and disc
degeneration on the load transfer in a lumbar functional spinal unit, J. Biomech.,
2004, Vol. 37, 1061-1069
18. Rosenau E.C., In vitro strain measurement with strain gauges for validation of
detailed numerical models of the lumbar spine, 2010, Dissertation, University of
Hamburg, Department of Medicine