ARUP; ISBN: 978-0-9562121-5-3 - CMBBE 2012 - Cardiff University

3. Timmins, L.H., Miller M.W. Clubb, F.J. and Moore J.E., Increased artery wall stress
post-stenting leads to greater intimal thickening. Lab. Invest., 2011, 91(6): p. 955-
967.
4. Chua, S.N.D., Mac Donald, B.J., and Hashmi M.S.J., Finite-element simulation of
stent expansion. Journal of Materials Processing Technology, 2002. 120(1-3): p.
335-340.
5. Petrini, L., Migliavacca, F., Auricchio, F. and Dubini, G., Numerical investigation
of the intravascular coronary stent flexibility. J Biomech, 2004. 37(4): p. 495-501.
6. Wang, Y. X., Yi, H, and Ni, Z., Experimental Research on Balloon-expandable
Endovascular Stent Expansion. Conf Proc IEEE Eng Med Biol Soc, 2005. 3: p.
2272-5.
7. Walke, W., Paszenda, Z., Filipiak J., Experimental and numerical biomechanical
analysis of vascular stent. J. Mater. Process.Tech, 2005, 164: p. 1263-1268.
8. Kiousis, D.E., Wulff, A.R, and Holzapfel, G.A., Experimental studies and numerical
analysis of the inflation and interaction of vascular balloon catheter-stent systems.
Ann Biomed Eng, 2009. 37(2): p. 315-30.
9. Narracott, A. J., Hose, D. R., Lawford, P. V. and Gunn, J., Measurement of the
symmetry of in vitro stent expansion: a stereo-photogrammetric approach. J Med
Eng Technol, 2003. 27(2): p. 59-70.
10. Squire, J.C., Rogers C., Edelman E.R, Measuring arterial strain induced by
endovascular stents. Med Biol Eng Comput1999, 37(6): p. 692-8.
11. Zwierzak, I. Fenner J.W., Narracott A.J., Strain Measurement in an Elastic Material
under Large Deformation Using Optical Reconstruction Methods, Int Conf on Advs
of Med and Health Care through Tech, 2011. p. 120-123.
12. ESB 2012: 18th Congress of the European Society of Biomechanics, in press.
13. Bouguet J., Calibration Toolbox in Matlab, http://www.vision.caltech.edu/bouguetj,
2008