ARUP; ISBN: 978-0-9562121-5-3 - CMBBE 2012 - Cardiff University

Recommendations

Info

Torque[Nm] Force [N] Force [N] 1000 12 10 100 -2 -4 80 60 40 20 800 600 400 200 8 6 4 2 0 0 0,25 0,5 0,75 1 1,25 1,5 Fig.5 Vertical components of the forces in the intervertebral discs L4_L5 L2_L3 0 0 0,25 0,5 0,75 1 1,25 1,5 L1_L2 SAC_L5 Fig.6 Torques in the intervertebral discs (flexion/extension) ISL time [s] time [s] PLL SAC_L5 L4_L5 L3_L4 L1_L2 LF_R LF_L SSL 0 0 0,25 0,5 0,75 1 1,25 1,5 time [s] Fig.7 Forces in the ligaments of the functional unit L4-L5
The column diagramm of Fig.8 shows the intradiscal pressure calculated with the MBSmodel compared to results from Finite Element - modeling [3] and in vivo measurements [4], [5], [6]. Obviously the results are in the same order of magnitude. Pressure [MPa] 0,7 0,6 0,5 0,4 0,3 0,2 0,1 Fig.8 Intradiscal pressure. Comparison of the simulation results with FE modeling and the results of in vivo experiments 6. REFERENCES 0 Sac-L5 L5-L4 L4-L3 L3-L2 L2-L1 MBS model Rohlmann [3] Wilke [4] Sato [5] Andersson [6] 1. Schmoelz, W., Erhart S., Unger S., Disch A.C., Biomechanical evaluation of a posterior non-fusion instrumentation of the lumbar spine, European Spine Journal, published online: 20 December 2011 2. Panjabi, M. and White A., Clinical biomechanics of the spine. Philadelphia: JB Lippincott Company, 1990, 24. 3. Rohlmann, A., Zander T., Rao M. and Bergmann, G., Applying a follower load delivers realistic results for simulating standing, Journal of Biomechanics, 2009, Vol. 42, 1520-1526. 4. Wilke, H.-J., Neef P., Caimi M., Hoogland T. and Claes L.E., New In Vivo measurement of pressure in the intervertebral disc in daily life. Spine, 1999, Vol. 24, 755-762. 5. Sato, K., Kikuchi S. and Yonezawa T., In Vivo intradiscal pressure measurement in healthy individuals and in patients with ongoing back problems, Spine, 1999, Vol. 24, 2468-2474. 6. Andersson, G.B., Ortengren, R., Nachemson, A., Intradiskal pressure, intraabdominal pressure and myoelectric back muscle activity related to posture and loading. Clinical Orthopaedics and Related Research 1977,Vol. 129, 156-164.
Page 1 and 2:
The Proceedings of the 10 th Intern
Page 3 and 4:
Install Adobe Reader 8 or 9 (http:/
Page 5 and 6:
Content: POSTERS: BRAIN: CELL: EVAL
Page 7 and 8:
Modeling of blood flow through a fl
Page 9 and 10:
The mesh generation of the model wa
Page 11 and 12:
Figure6 . The stroke volume data fo
Page 13 and 14:
Digital Subtraction Phonocardiograp
Page 15 and 16:
mobile cart for easy recording in c
Page 17 and 18:
Figure 7. This image shows PCG samp
Page 19 and 20:
Our approach is an improvement in t
Page 21 and 22:
one cements as well as its behaviou
Page 23 and 24:
Typical dimensions of lumbar verteb
Page 25 and 26:
attributed to the change of stiffne
Page 27 and 28:
lifestyle and obesity. In that cont
Page 29 and 30:
T was the temperature in Kelvin and
Page 31 and 32:
sustained tensile strains stimulate
Page 33 and 34:
An approach aiming at determining a
Page 35 and 36:
failure load. 2.4 Simulation of reh
Page 37 and 38:
REFERENCES 1. Vunjak-Novakovic G, A
Page 39 and 40:
3. FIF-BAL BIOREACTOR The FIF devic
Page 41 and 42:
value of p nearest to dqc=0 we cont
Page 43 and 44:
(Wanless, 1999). This low value cou
Page 45 and 46:
3. MATERIALS AND METHODS A CAD mode
Page 47 and 48:
did not allow gap closure. Maximum
Page 49 and 50:
hand, if the IFM is too large, remo
Page 51 and 52:
2. INTRODUCTION Intervertebral disc
Page 53 and 54:
Figure 3. T1 signal enhancement in
Page 55 and 56:
1. ABSTRACT TIP CELLS AT THE TOP: M
Page 57 and 58:
Fig. 1. Schematic overview of the m
Page 59 and 60:
Fig. 3. Image of the amount of VEGF
Page 61 and 62:
THE COMPUTATIONAL MODEL OF DENTAL I
Page 63 and 64:
processing application STL Model Cr
Page 65 and 66:
For the implant/bone interaction as
Page 67 and 68:
ABSTRACT THE IMPACT OF SELECTION BI
Page 69 and 70:
Figure 1: flow chart showing the op
Page 71 and 72:
Figure 2: Time course of cytosolic
Page 73 and 74:
CONSTITUTIVE MODELLING OF THE ANNUL
Page 75 and 76:
it is well known the non-linear nat
Page 77 and 78:
Therefore, we have decided to carry
Page 79 and 80:
EXTRACTION OF PHALANGEAL JOINT PARA
Page 81 and 82:
column vectors of P. Denoting the v
Page 83 and 84:
End i joint angles and length offse
Page 85 and 86:
Validation of Strain Mapping for th
Page 87 and 88:
allows the calculation of strain ma
Page 89 and 90:
RMS error was 0.054 and the strains
Page 91 and 92:
AN APPROACH FOR THE REDUCTION OF TH
Page 93 and 94:
The relation between the time-deriv
Page 95 and 96:
Error in position [mm] Error in pos
Page 97 and 98:
ANALYSIS OF THE INTRAINDIVIDUAL DIF
Page 99 and 100:
Fig.1: Frontal view on all subchond
Page 101 and 102:
[6] M. Bozkurt, B. B. Kentel, G. Ya
Page 103 and 104:
on the actual necessary time needed
Page 105 and 106:
Illustration 2: The initially spher
Page 107 and 108:
cell if it is hardly able to deform
Page 109 and 110:
fit with a reference anatomy in min
Page 111 and 112:
show that patellar mal-positioning
Page 113 and 114:
Experimental and numerical analysis
Page 115 and 116:
stenosis in both simulations and ex
Page 117 and 118:
stented case, corresponding to the
Page 119 and 120:
EVALUATION OF DIFFERENT LOADING CON
Page 121 and 122:
were modeled with identical geometr
Page 123 and 124:
each simulation and the position of
Page 125 and 126:
FINITE ELEMENT MODEL ANALYSIS OF HU
Page 127 and 128:
Figure 1: Maximal principal strains
Page 129 and 130:
Method for classification of porcin
Page 131 and 132:
3.3 Identification of Paths Accordi
Page 133 and 134:
Table. 1. Descriptive Patterns used
Page 135 and 136:
CHARACTERIZING THE MECHANICAL MICRO
Page 137 and 138:
3.1.3 Cell proliferation It is assu
Page 139 and 140:
Stress [Pa] 4 3 2 1 0 Mean stress A
Page 141 and 142:
REFERENCES [1] A.M. Bratt-Leal, R.L
Page 143 and 144:
y exposure to interstitial fluid sh
Page 145 and 146:
according to (Eq. 2), nor averaged
Page 147 and 148:
emoved the oscillations partially a
Page 149 and 150:
static load and a dynamic load. A s
Page 151 and 152:
positive effect of the number of ac
Page 153 and 154:
pathways and their interactions tha
Page 155 and 156:
applications, the need for accuracy
Page 157 and 158:
avoid violating the initial geometr
Page 159 and 160:
6. CONCLUSION The examples of appli
Page 161 and 162:
Fig. 1 Semicircular canal structure
Page 163 and 164:
4. RESULT Fig. 6 FSI model of semic
Page 165 and 166:
6. ACKNOWLEDGEMENT This research wa
Page 167 and 168:
ods to the biocompatible plastic po
Page 169 and 170:
Table 1: Analysis conditions Static
Page 171 and 172:
[3] Brantigan, J. W., Steffee, A. D
Page 173 and 174:
femoral head fracture, the femoral
Page 175 and 176:
Fig 3. Schematic drawing of the ste
Page 177 and 178:
6. CONCLUSION Fig 7. Analysis resul
Page 179 and 180:
and angular rates were registered b
Page 181 and 182:
former, there were assumed the foll
Page 183 and 184:
delivered dynamic support, which pr
Page 185 and 186:
insertion of provisional restoratio
Page 187 and 188:
Figure 4: Implant displacements obt
Page 189:
5. DISCUSSION AND CONCLUSION Initia
Page 192 and 193:
at which microdamage originates. Fo
Page 194 and 195:
4. RESULTS The load response varied
Page 196 and 197:
current study to explore the effect
Page 198 and 199:
implant correctly from the finite e
Page 200 and 201:
(a) (b) (c) (d) (e) Figure 3. The s
Page 202 and 203:
(a) (b) Figure 6. The meshed model
Page 204 and 205:
(a) (b) Figure 9. Cumulative probab
Page 206 and 207:
NUMERICAL EVALUATION AND MEDICAL CO
Page 208 and 209:
compared by overlaying the real dat
Page 210 and 211:
four sample patient data, outcomes
Page 212 and 213:
A POROELASTIC APPROACH FOR AN OPEN
Page 214 and 215:
where indexes U, P refer to the unk
Page 216 and 217:
RESULTS As a preliminary test, a 0.
Page 218 and 219:
BIOMECHANICAL BEHAVIOR OF CANCELLOU
Page 220 and 221:
cement acts perfectly, therefore it
Page 222 and 223:
cancellous bone of natural joints a
Page 224 and 225:
COMPUTATIONAL MODELING OF TANGLED A
Page 226 and 227:
The centers of the simulated cells
Page 228 and 229:
untangled, the local fiber displace
Page 230 and 231:
TOWARDS A WAVELET BASED MEDICAL IMA
Page 232 and 233:
however at each decomposition scale
Page 234 and 235:
the MATLAB software (for the Modifi
Page 236 and 237:
A FLUID STRUCTURE INTERACTION MODEL
Page 238 and 239:
hyperelastic based on available exp
Page 240 and 241:
t [ms] 30 70 160 220 270 Pressure [
Page 242 and 243:
MECHANICAL BAHAVIOR OF DIFFERENT NI
Page 244 and 245:
parameters necessaries to use this
Page 246 and 247:
F1 and Mtwo were directly related t
Page 248 and 249:
MECHANICAL EFFECT ON METABOLIC TRAN
Page 250 and 251:
an initial nil lactate concentratio
Page 252 and 253:
present study, such values were phe
Page 254 and 255:
EVALUATION OF FEMORAL COMPONENT MIC
Page 256 and 257:
TS implants employed a “hybrid”
Page 258 and 259:
5. DISCUSSION i ii Figure 2: Compar
Page 260 and 261:
THE MECHANICAL ENVIRONMENT IN THE D
Page 262 and 263:
instead the femur was supported by
Page 264 and 265:
It must be noted however, that in t
Page 266 and 267:
1. ABSTRACT MODELING OF ARTICULAR C
Page 268 and 269:
exp 1 1 2 1 where and are i
Page 270 and 271:
Implant Fig.2. Axisymmetric represe
Page 272 and 273:
A MULTI-SCALE ANISOTROPIC CONSTITUT
Page 274 and 275:
3.2 Decoupled invariant formulation
Page 276 and 277:
Fig. 1. Experimental data from unia
Page 278 and 279:
VALIDATION AND CALIBRATION PROCESSE
Page 280 and 281:
Figure 1: A three-step process simu
Page 282 and 283:
The validation process employed on
Page 284 and 285:
FLUID-STRUCTURE INTERACTION ANALYSI
Page 286 and 287:
The coupled SQA model and the conve
Page 288 and 289:
Point P7, located at the toe of the
Page 290 and 291:
THE INFLUENCE OF UNCERTAIN ANATOMIC
Page 292 and 293:
Figure 3 exemplifies for intradisca
Page 294 and 295:
8. CONCLUSIONS Unsurprisingly, the
Page 296 and 297:
COMPARISON OF DIFFERENT LOADING CON
Page 298 and 299:
Figure 1 Finite element model of th
Page 300 and 301:
6 CONCLUSION It is a feasible way t
Page 302 and 303:
FROM CELL CONTRACTILITY TO CURVATUR
Page 304 and 305:
4. MODEL When cells adhere on a sub
Page 306 and 307:
organisation. Understanding the pri
Page 308 and 309:
PREOPERATIVE PLANNING SUPPORT SYSTE
Page 310 and 311:
[9]. Stenosis of 25, 45, 65 and 85
Page 312 and 313:
Fig. 1:Dependent and independent va
Page 314 and 315:
1. ABSTRACT Local strain measuremen
Page 316 and 317:
around 100µm (halfway through the
Page 318 and 319:
sampling points at different cross
Page 320 and 321:
CLASSIFICATION OF PHYSICAL ACTIVITY
Page 322 and 323:
induces a vertical alignment of the
Page 324 and 325:
accelerations combination). However
Page 326 and 327:
line under translation. Information
Page 328 and 329:
In this study, we apply a meshless
Page 330 and 331:
used the PAC constitutive constants
Page 332 and 333:
1006031) is gratefully acknowledged
Page 334 and 335:
improvements were seen in both grou
Page 336 and 337:
Pre-augmentation Position 1, V=3mL
Page 338 and 339:
5. ACKNOWLEDGEMENTS Funding for thi
Page 340 and 341:
the hemodynamics in cerebral aneury
Page 342 and 343:
4. RESULTS AND DISCUSSION In order
Page 344 and 345:
processing methods need to be devel
Page 346 and 347:
3. METHODS 3.1 Experimental Method
Page 348 and 349:
Figure 2 - Micrographs for tensile
Page 350 and 351:
analysis of the tissue mechanics. B
Page 352 and 353:
3. METHODS 3.1 Specimen Preparation
Page 354 and 355:
of five points across the mid mid-c
Page 356 and 357:
equired to replicate the deformatio
Page 358 and 359:
pre-load within the plate (compress
Page 360 and 361:
4. RESULTS The load-deformation beh
Page 362 and 363:
fracture fixation. Medical Engineer
Page 364 and 365:
model. It approximates knee kinemat
Page 366 and 367:
computational cost remains moderate
Page 368 and 369:
Concerning the optimization procedu
Page 370 and 371:
aesthetic recovery. However, in som
Page 372 and 373:
atio experimented by both wounds is
Page 374 and 375:
VARIATION OF MICRO-ARCHITECTURE AND
Page 376 and 377:
osteoporotic (OP). The sample volum
Page 378 and 379:
Figure 4: Mean error in orthotropy
Page 380 and 381:
INVESTIGATION OF CORTICAL SHELL STR
Page 382 and 383:
When creating the degenerated FE mo
Page 384 and 385:
Figure 4. Degeneration sensitivity
Page 386 and 387:
METHODS TO ACCELERATE FINITE ELEMEN
Page 388 and 389:
the “joint” constraints configu
Page 390 and 391:
Figure 4: Absolute prediction error
Page 392 and 393:
EFFECT OF POST TREATMENT FOR MULTIP
Page 394 and 395:
Fig.2 Inlet velocity profile indica
Page 396 and 397:
4.3 WSS results Figure 8 shows the
Page 398 and 399:
approximated by the so-called Ritz
Page 400 and 401:
Figure 2: Viscohyperelastic cube: (
Page 402 and 403:
There is no optimal density-elastic
Page 404 and 405:
Fig. 2 Cut view of FE-model. Shown
Page 406 and 407:
5. Weis JA, Miga MI, Granero-Moltó
Page 408 and 409:
3. SYSTEM DESIGN Sheep eyes, as the
Page 410 and 411:
which provides natural tactile feed
Page 412 and 413:
113:341-342 20. Henderson B. A., Gr
Page 414 and 415:
health area. According to estimates
Page 416 and 417:
Table 1. RMS Value based on subject
Page 418 and 419:
6. REFERENCES 1. http://www.disable
Page 420 and 421:
ehavior [5]. From the viewpoint of
Page 422 and 423:
Fig. 1 Average Male and Female's L4
Page 424 and 425:
4. Deyo, R.A., and Weinstein, J. N.
Page 426 and 427:
geometry of the cell and ECM degrad
Page 428 and 429:
Shown in Fig. 2(b) is a plot of the
Page 430 and 431:
6. REFERENCES 1. Dubin-Thaler B.J.,
Page 432 and 433:
We implemented our individual-based
Page 434 and 435:
3.3.1 Centers of mass Table 1: Base
Page 436 and 437:
average coordination num ber averag
Page 438 and 439:
BIOMECHANICAL ANALYSIS OF THE MUSCU
Page 440 and 441:
of the ligament strain; a linear re
Page 442 and 443:
lengthening, respectively, if compa
Page 444 and 445:
THE EFFECT OF HIGH TIBIAL OSTEOTOMY
Page 446 and 447:
The 3D LiveWire tool was used as an
Page 448 and 449:
Table II: Peak medial and lateral f
Page 450 and 451:
INVESTIGATING CHANGES IN JOINT LOAD
Page 452 and 453:
4. RESULTS Table 1 shows the mean m
Page 454 and 455:
Fig.5 displays the OKS and KOS pre
Page 456 and 457:
Dynamic Touch of Effective Golf Swi
Page 458 and 459:
properties of a golf club and hand
Page 460 and 461:
perturbation in e3 whereas player B
Page 462 and 463:
1. Kim, W., Response to letter to t
Page 464 and 465:
configuration.[4] have explained ho
Page 466 and 467:
compartments as well as a single mu
Page 468 and 469:
5. Shabana, A.A., Dynamics of multi
Page 470 and 471:
Five healthy volunteers (age: 38.3
Page 472 and 473:
internal lumbar spinal shape was de
Page 480 and 481:
Airflow Simulation of Nasal Cavity
Page 482:
temperature [5], and Wbl is the wat
Page 485 and 486:
Figure 8. Figure 8(a) illustrates t
Page 487 and 488:
Finite element models of the hip ca
Page 489 and 490:
3.2 Finite Element Analysis Followi
Page 491 and 492:
5. DISCUSSION Previous DEA implemen
Page 493 and 494:
STATISTICAL SHAPE MODELING OF CAM-T
Page 495 and 496:
Thirty-three control femurs (25 mal
Page 497 and 498:
asymptomatic subjects 7,9 . The Hot
Page 499 and 500:
6. REFERENCES 1. Ganz, R., Parvizi,
Page 501 and 502:
NUMERICAL IDENTIFICATION OF THE PER
Page 503 and 504:
2. METHOD AND NUMERICAL MODEL. 2.1
Page 505 and 506:
1 u dV V u. (Eq. 2) V The permeab
Page 507 and 508:
1. ABSTRACT PASSIVE AND ACTIVE MUSC
Page 509 and 510:
presented in figure 2 the simulatio
Page 511 and 512:
Indenter Stroke [mm] Muscle Force [
Page 513 and 514:
Objectives Long bone failure charac
Page 515 and 516:
the specimens in three point bendin
Page 517 and 518:
developing a subject-specific finit
Page 519 and 520:
Models used in the past, mostly bas
Page 521 and 522:
In this work it is presented the de
Page 523 and 524:
Average Table 1.- Walk average test
Page 525 and 526:
angles for the step of 2.28° and 8
Page 527 and 528:
insufficiency syndrome (TIS), defin
Page 529 and 530:
a) b) c) Fig. 5 - Contact interface
Page 531 and 532:
EOS. Among these options, VEPTR has
Page 533 and 534:
dissection occurs when blood intrud
Page 535 and 536:
mean value of 0.0310 m s -1 . The o
Page 537 and 538:
progression. It can in turn contrib
Page 539 and 540:
dependent data. They conclude that
Page 541 and 542:
found that it is extremely difficul
Page 543 and 544:
endering loop is started and the ra
Page 545 and 546:
3.1 Imaging protocol of the knee A
Page 547 and 548:
Fig. 3: Pressure distribution in th
Page 549 and 550:
7. REFERENCES 1. Masouros, S.D., Bu
Page 551 and 552:
and estimate in vivo tissue strains
Page 553 and 554:
tendon has a larger moment arm abou
Page 555 and 556:
Song, H. M., Smith, R. L., Longaker
Page 557 and 558:
Fig. 1. Single line transducer resu
Page 559 and 560:
Let P INT be the data set of the lo
Page 561 and 562:
could quantify the initial structur
Page 563 and 564:
expansion of a stent, a metallic sc
Page 565 and 566:
immediately after stent expansion a
Page 567 and 568:
6. ACKNOWLEDGMENT This research is
Page 569 and 570:
Deformation of the arterial surface
Page 571 and 572:
separate study to be described in a
Page 573 and 574:
3. Timmins, L.H., Miller M.W. Clubb
Page 575 and 576:
migrate in a unique fashion to the
Page 577 and 578:
Fig. 1: Domain and schematic repres
Page 579 and 580:
Furthermore, the values are spread
Page 581 and 582:
this study, our goal is to establis
Page 583 and 584:
Figure 3. Relative length change in
Page 585 and 586:
5. Erdemir A, Sibole S. Open Knee:
Page 587 and 588:
lateralis (inferior and superior) f
Page 589 and 590:
during mouth closing and chewing. O
Page 591 and 592:
BIOMECHANICAL MODELING OF THE HUMAN
Page 593 and 594:
appropriates mechanical properties
Page 595 and 596:
Fig. 4: Correlation of the location
Page 597 and 598:
1. ABSTRACT COMPUTER AIDED TUMOR RE
Page 599 and 600:
B. Cutting planes The surgeon defin
Page 601 and 602:
4.RESULTS To test the developed sys
Page 603 and 604:
FROM PATIENT-SPECIFIC DATA TO MULTI
Page 605 and 606:
catheterization mean measurements (
Page 607 and 608:
the different virtual surgical desi
Page 609 and 610:
1. ABSTRACT DIGITAL ULTRASOUND DESP
Page 611 and 612:
2.2 Filtering Based Wavelet 2.2.1 C
Page 613 and 614:
Table 1: quantitative criteria used
Page 615 and 616:
Mural Thrombosis in a Two-Level Com
Page 617 and 618:
But, the soft repulsive force can n
Page 619 and 620:
Ratio of adhered PLT a simplificati
Page 621 and 622:
DEGRADATION OF MAGNESIUM ALLOY STEN
Page 623 and 624: study and the parameter setting can
Page 625 and 626: Fig. 5. Damage evolution of the thr
Page 627 and 628: NUMERICAL SIMULATIONS OF FATIGUE FO
Page 629 and 630: Figure 1. Scheme of the two approac
Page 631 and 632: Figure 3. On the left, alternating
Page 633 and 634: INVESTIGATION OF HEAD-NECK KINEMATI
Page 635 and 636: complexity of the vertebrae and sku
Page 637 and 638: nearly no tension occurred for the
Page 639 and 640: 9. Ito S, Ivancic PC, Panjabi MM, C
Page 641 and 642: [Ntsinjana et al., 2011], commonly
Page 643 and 644: impedances were maintained within p
Page 645 and 646: 6. Pennati G., Corsini C., Cosentin
Page 647 and 648: analyse the effect that different a
Page 649 and 650: attached cases this value was highe
Page 651 and 652: References 1. Nordin M and Frankel
Page 653: therapy to achieve the desired medi
Page 657 and 658: iomechanical response of the leg to
Page 659 and 660: algorithm has to be integrated into
Page 661 and 662: to a modification in the tooth disp
Page 663 and 664: 5. CONCLUSIONS 5.1 Geometry and per
Page 665 and 666: present work is to show the ability
Page 667 and 668: [6,7]. In order to reproduce numeri
Page 669 and 670: 5. DISCUSSION, CONCLUSIONS AND PERS
Page 671 and 672: 3.1 Generation of the vertebral sur
Page 673: 3.4 Modeling of the facet joints Th
Page 677 and 678: tool to evaluate the drug distribut
Page 679 and 680: Figure 3: The mean value of the dos
Page 681 and 682: INFLUENCE OF KYPHOSIS ON SPINAL LOA
Page 683 and 684: (a) (b) (c) Fig. 1. The three repre
Page 685 and 686: etween T6 and T9 with a higher degr
Page 687 and 688: A COMPARISON BETWEEN STANDARD AND D
Page 689 and 690: the SB with a 2.5 mm balloon; ii) o
Page 691 and 692: A TAWSS [Pa] B OSI [Pa] C 0 0.25 0.
Page 693 and 694: ABSTRACT CONSTITUTIVE MODELLING OF
Page 695 and 696: 20% compression strains were impose
Page 697 and 698: 4. DISCUSSION The limited number of
Page 699 and 700: AN ALGORITHM FOR MODELING THE FIBRE
Page 701 and 702: 1 - Compute the centre of the botto
Page 703 and 704: (a) (b) Figure 2. Load-displacement
Page 705 and 706: A bio-mechanics based methodology t
Page 707 and 708: to a particular body part based on
Page 709 and 710: Injury Cost (USD) Million 0.7 0.6 0
Page 711 and 712: A SENSITIVITY ANALYSIS OF ADAPTIVE
Page 713 and 714: elationships can be found that rela
Page 715 and 716: Fig. 2: Percentage of bone volume w
Page 717 and 718: APPLICATION OF REACTION-DIFFUSION W
Page 719 and 720: AIRFLOW VENTILATION THROUGH HUMAN M
Page 721 and 722: solve all the governing equations.
Page 723 and 724: Fig. 4 Streamlines through the osti
Page 725 and 726:
MOLECULAR DYNAMICS SIMULATIONS FOR
Page 727 and 728:
COARSE-GRAINED MOLECULAR DYNAMICS S
Page 729 and 730:
DESIGN AND STRUCTURAL EVALUATION OF
Page 731 and 732:
Figure 2 shows the optimal unit-cel
Page 733 and 734:
ENUM (MPa) 100 90 80 70 60 50 40 30
Page 735 and 736:
vivo menisco-tibial kinematics duri
Page 737 and 738:
Loading the fully extended knee wit
Page 739 and 740:
is also subject to variation due to
Page 741 and 742:
environment in comparison to fixed
Page 743 and 744:
4. RESULTS AND DISCUSSION Convergen
Page 745 and 746:
Because of the orthotropic assumpti
Page 747 and 748:
3D RECONSTRUCTION OF STENTED PORCIN
Page 749 and 750:
Fluid model. The final configuratio
Page 751 and 752:
Table 1: Computed slice measurement
Page 753 and 754:
ANALYSIS OF THE EFFECT OF CONSIDERI
Page 755 and 756:
For all these models, C1 = µ/2, µ
Page 757 and 758:
the difference in percentage betwee
Page 759 and 760:
A COMPUTATIONAL METHOD TO ESTIMATE
Page 761 and 762:
C10, C01 and d were taken from [10]
Page 763 and 764:
4. RESULTS Fig. 2 shows the results
Page 765 and 766:
COMPUTATIONAL AND EXPERIMENTAL MODE
Page 767 and 768:
data using commercial software (Mim
Page 769 and 770:
vitro (40 vs 34%), at the expense o
Page 771 and 772:
FINITE ELEMENT ANALYSES OF IN VIVO
Page 773 and 774:
The non-linear behaviour of the art
Page 775 and 776:
Figure 6. Constant-life diagram for
Page 777 and 778:
Optimal acceleration adjustment to
Page 779 and 780:
, , , ,
Page 781 and 782:
The vertical force bump observed du
Page 783 and 784:
NEURAL NETWORK-BASED PREDICTION OF
Page 785 and 786:
3. MATERIAL AND METHODS 3.1 Experim
Page 787 and 788:
from subjects S1, S2, S3, S5, and S
Page 789 and 790:
APPLICATION OF A MODIFIED ELASTIC F
Page 791 and 792:
h and h being the thickness of the
Page 793 and 794:
0.3 were used for the flat surface
Page 795 and 796:
simulations of the mechanical respo
Page 797 and 798:
50000 images have been acquired. Th
Page 799 and 800:
Fig.1 Modules of the proposed capsu
Page 801 and 802:
5. CONCLUSION This paper describes
Page 803 and 804:
dependent on the implementation of
Page 805 and 806:
joint computer model was driven wit
Page 807 and 808:
otation. The AP laxity test showed
Page 809 and 810:
A COMPUTATIONAL MODEL OF THE GROWTH
Page 811 and 812:
where n p is the number of prolifer
Page 813 and 814:
Hypertrophic columnar cartilage 0.2
Page 815 and 816:
SIMULATION OF DAILY LIVING MOVEMENT
Page 817 and 818:
otations were kept at zero, since t
Page 819 and 820:
cavity (van der Helm, 1994). Howeve
Page 821 and 822:
Solving Overconstrained Kinematic i
Page 823 and 824:
3.3. Muscles Muscles are modelled a
Page 825 and 826:
5. DISCUSSION A musculoskeletal num
Page 827 and 828:
EFFECT OF OSCILATORY FLOW ON MORPHO
Page 829 and 830:
dimensionless frequency . With the
Page 831 and 832:
Wntsignaling, J Clin Invest., 2006,
Page 833 and 834:
Maximization (EM) algorithm witch e
Page 835 and 836:
4. RESULTS: n 1 2 x f ( x ; )
Page 837 and 838:
5. CONCLUSION In this work, a semi-
Page 839 and 840:
allow cell construct image inspecti
Page 841 and 842:
formula can be written as a linear
Page 843 and 844:
( ) (4) Poisson‟s ratio was assum
Page 845 and 846:
a) b) c) d) Figure 7 Validation: a)
Page 847 and 848:
DEVELOPMENT OF A NEW COMPUTATIONAL
Page 849 and 850:
The ScanIP wizard creates the new i
Page 851 and 852:
Fig. 5: Computer experiments: poste
Page 853 and 854:
A BIOMECHANICAL CONCEPT FOR CONSTRU
Page 855 and 856:
Figure 3. Construction of the radia
Page 857 and 858:
6. REFERENCES 1. Lees, S., A study
Page 859 and 860:
from cadaver surgeries were recreat
Page 861 and 862:
mean resection parameters and the p
Page 863 and 864:
5. DISCUSSION This study proposes a
Page 865 and 866:
simulations are evaluated by quanti
Page 867 and 868:
improvement of the shoulder prosthe
Page 869 and 870:
13. Coley B., Jolles B. M., Farron
Page 871 and 872:
simulations. Implicit in this setup
Page 873 and 874:
assigned zero fluid pressure bounda
Page 875 and 876:
the efficacy of predicting cellular
Page 877 and 878:
Another important function of the l
Page 879 and 880:
The insert (Fig. 3) is the part aga
Page 881 and 882:
changes due to the testing conditio
Page 883 and 884:
3. IN VIVO MEASURED LOAD COMPONENTS
Page 885 and 886:
anthropometric data - a data set fo
Page 887 and 888:
COMPUTATIONAL MODELING OF HIGHLY PO
Page 889 and 890:
objects smaller than one tenth of a
Page 891 and 892:
as 221.5 MPa. This value is more th
Page 893 and 894:
Macrostress and Macrostrain Finite
Page 895 and 896:
3.2. Extraction of individual artic
Page 897 and 898:
Unique strain patterns were observe
Page 899 and 900:
poroviscoelastic simulation of the
Page 901 and 902:
anchorage of the cartilage into a p
Page 903 and 904:
load of 0.5 N) resulted in a 55 kPa
Page 905 and 906:
properties as well as protect the h
Page 907 and 908:
Dynamic cell seeding combines two c
Page 909 and 910:
order (PB). The particles adhered (
Page 911 and 912:
2. D. Wendt, A. Marsano, M. Jakob,
Page 913 and 914:
2. Only a few high-level clinical s
Page 915 and 916:
A quasi-static analysis was perform
Page 917 and 918:
e increased by using stiffer or tig
Page 919 and 920:
Despite the importance of taking th
Page 921 and 922:
Table 2: Score chart presented to t
Page 923 and 924:
We conclude that the model develope
Page 925 and 926:
presented system - parallelization
Page 927 and 928:
image is projected to the subsequen
Page 929 and 930:
6. CONCLUSIONS The presented in the
Page 931 and 932:
first simulation uses data provided
Page 933 and 934:
Table 1: Models used in this study.
Page 935 and 936:
direction at knee extension, placin
Page 937 and 938:
3. METHODS 3.1. Model of heat trans
Page 939 and 940:
condition before and after heating.
Page 941 and 942:
during daily activities reported in
Page 943 and 944:
samples of brain tissue were extrac
Page 945 and 946:
5. DETERMINING MECHANICAL PROPERTIE
Page 947 and 948:
2001, Vol. 38 (4), 335-345. 8. Vela
Page 949 and 950:
chamber [4]. After obtaining the va
Page 951 and 952:
4. RESULTS 4.2 Surface and solid me
Page 953:
7. ACKNOWLEDGMENTS Financial fundin
Page 956 and 957:
affect crack penetration into osteo
Page 958 and 959:
Therefore, in order to examine the
Page 960 and 961:
3. Mischinski, S., Ural, A., 2011,
Page 962 and 963:
esearchers. The power of a finite-e
Page 964 and 965:
figure 2, we can determine the node
Page 966 and 967:
architecture, Muscle & Nerve, 2004,
Page 968 and 969:
ensure good short-term and long-ter
Page 970 and 971:
Table I - Micromotion results at th
Page 972 and 973:
COMBINED BONE-IMPLANT FIXATION: A P
Page 974 and 975:
FRICTIONAL PROPERTIES OF OSTEOARTHR
Page 976 and 977:
With the following boundary conditi
Page 978 and 979:
pressures higher than normal contac
Page 980 and 981:
1. ABSTRACT DYNAMIC PRESSURE RESPON
Page 982 and 983:
quasi-static solution, and both pos
Page 984 and 985:
(excluding the cadaveric validation
Page 987 and 988:
AN ANALYTICAL MODEL TO INVESTIGATE
Page 989 and 990:
K sh = 2. 3E sh 2 ( ) 2 1 2 1−ν
Page 991 and 992:
Fig. 7 modeling the oblique impact
Page 993 and 994:
A NON-LINEAR BIPHASIC MODEL FOR THE
Page 995 and 996:
system, it is convenient to write t
Page 997 and 998:
only with very small damping parame
Page 999 and 1000:
A PARAMETERIZED FE MODEL FOR SIMULA
Page 1001 and 1002:
the study of Polikeit et al. [10].
Page 1003 and 1004:
There are obvious limitations to ou
Page 1005 and 1006:
Abnormal stresses are often cited a
Page 1007 and 1008:
4. RESULTS The methods used to meas
Page 1009 and 1010:
that muscle imbalance associated wi
Page 1011 and 1012:
BIOCHEMICAL MODEL TO PREDICT THE ON
Page 1013 and 1014:
3.1 Model description The regulator
Page 1015 and 1016:
[3] Shier D., 2001, Hole’s Human
Page 1017 and 1018:
Biomechanics of Human Gluteal Tissu
Page 1019 and 1020:
information. Based on the indentati
Page 1021 and 1022:
t 1 ⎧⎪ ⎫ 2 2 ⎪ ττττ ( t
Page 1023 and 1024:
REFERENCES 1. Gefen A., Gefen N., L
Page 1025 and 1026:
analysis of the large-scale human m
Page 1027 and 1028:
λ σ = σ (8) act isom f f 0 ⋅
Page 1029 and 1030:
In the absence of membranes, the mu
Page 1031 and 1032:
predicted. This is possible for mod
Page 1033 and 1034:
-7.2 mN. The average value of the m
Page 1035:
efore the joint moment reaches zero
show all

ARUP; ISBN: 978-0-9562121-5-3 - CMBBE 2012 - Cardiff University

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?