Manual

Manual – TopCon TC.GSS
Cooling
Installation and commissioning
Installation
In the standard version TopCon TC.GSS are equipped with internal
liquid cooling and 3 fans on the heat exchanger on the rear of the device.
For this reason the supply of cooling air is to be ensured while
complying with the maximum permissible temperature and humidity.
4
1
4
Fig. 58 Scheme of the passage of the air on installation in a cabinet case.
1 Air supply
2 Air exhaust,
3
Depth to the rear wall, 150 mm
4 Air short-circuit, must be prevented
Table 40 Schematic illustration of the cooling air flow.
For the supply and removal of cooling air, sufficiently large, suitable
cases with corresponding inlet and outlet openings for the passage of
the cooling air are to be used.
2011-10-18 107 / 298 V00.05b
2
2
3
2
6