Manual

Manual – TopCon TC.GSS
TopControl application
Tab –
Controller values group – “Controller”
bCTR_Const
VoltageModule
uiMOD_PWM_Ref
Actual controller mode
The following controller modes are indicated:
Value “0”: Constant current (or constant power)
Value “1”: Constant voltage
Actual controller correcting value pulse width modulation value
Value range: 0 – 992; (992 ≙ 100 % operation)
Table 105 Description of the variables that are allocated to the “Controller” group.
Device temperature group – “Temperature”
siADC_ActGRTemp Actual rectifier temperature
siADC_ActIGBTTemp Actual IGBT heat sink temperature
Table 106 Description of the temperature variables that are allocated to the “Temperature”
group.
2011-10-18 210 / 298 V00.05b
7