Manual

Manual – TopCon TC.GSS
Options and system options
Hardware options
5.2.1.3. Pressure drop as a function of the volume flow rate
The maximum permissible cooling liquid pressure is 16 bar = 16000 hPa.
The pressure drops for feed pipes, manifolds and pressure and flow
rate sensors are also to be taken into account.
In particular, on the parallel supply of several power supplies an appropriate
safety margin is to be included.
Recommended volume flow rate -1- 4 l/min – 6 l/min.
Graph − pressure drop-volume flow rate
Pressure drop
p v
mbar
400
300
200
100
2011-10-18 75 / 298 V00.05b
1
0 2 4 6 8 l/min
Volume flow rate
Fig. 40 Pressure drop as a function of the volume flow rate.
5
5.88
4.41
2.94
1.47
psi