Manual

Manual – TopCon TC.GSS
TopControl application
Tab –
5
6
tab –overview
1
2
3
4
5
6
Fig. 114 Overview of the tab.
1 2
Scope display
Indication of the signals that have been detected on the related channels -2-.
The values recorded can be zoomed and measured on the screen. See
“Scope display” group Fig. 115, Seite 201.
Channel selection
8 channels are available that can be indicated simultaneously on the display -
1-. Signals for recording can be defined in each channel. See “Channel”
group Fig. 119, Seite 205.
Control, group
Triggering the measuring process, saving/loading the scope configuration and
the values to be recorded. See “Control” group Fig. 121, Seite 213.
Trigger, group
Define the trigger signal, the trigger level and any delay as well as the trigger
edge on a signal. See Fig. 123, Seite 215.
Time resolution/sampl. Points, groups
Definition of the scope and temporal resolution by the number of points.
Status/Cursor, groups
Status indication for the scope and indication of the cursor position.
Table 97 tab – overview.
2011-10-18 200 / 298 V00.05b
4
3
7