Manual

Manual – TopCon TC.GSS
TopControl application
Menu – Window
Preferences – meaning of parameters
1
2
3
4
User level, list of options
Selection of the user level.
The indication in -2- changes as a function of the selection.
For information on changing the user level, see chapter 7.4.5.1, Seite 163.
Enabled tabs, read-only indication
Indication of which tabs (functions) are available.
Whether the tabs are available depends on the user level -1-.
For allocation of functions to user levels, see Table 75, Seite 166.
Default paths, text boxes (or corresponding button)
User files: Default folder for gridfiles
You can define a specific folder from which the gridfiles are
loaded or to which they are saved.
.var files and Std. Init files:
Only for use by the manufacturer!
Misc, check boxes
Longer comm timeouts:
Activation necessary if you use an RS232-to-Ethernet
converter and there are communication problems.
Default: cleared
Enable autorefresh after (re)connect:
Automatic updating of the parameters after (re)-connection
to the TC.GSS power supply.
Default: selected
Table 79 Parameters in the Preferences window.
2011-10-18 172 / 298 V00.05b
7