Manual

Manual – TopCon TC.GSS
CAUTION
8.2.2. TopCon firmware version
Maintenance
Maintenance of the software and firmware
You will find further information in “Determination of the system information”
chapter 9.2, Seite 253.
Updating the firmware versions
Damage can be caused by the following points!
If the TC.GSS power supply is updated unnecessarily, the
device may cease to function, as gridfiles and firmware
update must match.
A firmware update is not fully completed.
Avoidance:
Prior to a firmware update, contact support to clarify if an
update is necessary.
Only update the firmware if necessary.
If your application works without problems, an update is not
necessary.
2011-10-18 251 / 298 V00.05b
8