Manual

Manual – TopCon TC.GSS
The solution
Options and system options
Software options
Modules required for this usage
TopCon Quadro power supply
SASControl option
Test stand - modules
1
Fig. 47 Usage of the TopCon power supply as a test stand
TC.GSS power supply with TC.LIN
The TopCon simulates a solar panel with its function generator TFE. The
TC.LIN helps to improve the dynamic performance of the system, during the
process greater accuracy is required.
2 Test object: inverter
3
Table 36
Grid
The grid can be real or also be a simulation so that the test object can be operated
in an environment that closely represents reality.
Improvement of dynamic performance using the TC-LIN linear
series controller
A further improvement in the dynamic performance of the system is
provided by the usage of the downstream TC.LIN linear series controller.
The linear series controller communicates with the TopCon power
supply. While the TopCon power supply defines the signal “coarsely”,
the TC.LIN modifies the output signal with high dynamic performance
and accuracy (5 μs cycle time, 14.5-bit resolution). The combination of
the TopCon Quadro power supply and the TC.LIN linear series controller
can be used very flexibly and at the same time at high powers for the
realistic simulation of small to medium solar panels.
This functionality is largely controlled from the TopControl application.
Alternatively the functionality can be controlled via the DLL for custom
programs.
2011-10-18 86 / 298 V00.05b
5