Manual

Manual – TopCon TC.GSS
Appendix
Error list
10.2.2. Overview of group error codes and group warning codes
Indication of the reason for the malfunction
10
Flashing
code
Group error TopControl/HMI indication 1)
1 Internal error 0) Internal
2 PDSP error 1) Internal (PDSP)
3 Error due to the output current 2) Output current
4 Error due to the output voltage 3) Output voltage
5 Error in the electrical power supply 4) Supply
6 Temperature error 5) Temperature
7 Communication error 6) Communication
8 Modulator error 7) Internal (Modulator)
9 AD_Overrange_1-error 8) Internal (AD overrange 1)
10 AD_Overrange_2-error 9) Internal (AD overrange 2)
11 AD_Underrange_1-error A) Internal (AD underrange 1)
12 AD_Underrange_2-error B) Internal (AD underrange 2)
13 Login error C) Login
14 Configuration error D) Configuration
15 -- (not used) E) Not def.(group 14)
16 Interlock open, miscellaneous F) Interlock open,
Miscellaneous
1) On the HMI/RCU there is not enough space to output the errors or warnings with as much
detail as in TopControl. I.e. the text may be indicated truncated. The code in front of
the text is however identical in TopControl and HMI/RCU
The above list provides an overview of all existing group errors. Some
of the groups can also occur as warnings via the same group code.
The code prefix [ 0) ...F) ] helps to clearly identify the error
group/warning group. This code appears both in TopControl ("Show
Errordetail"/"Show Warndetail" buttons) and also on the HMI/RCU
(Error/Warning menu).
Overview of detail errors and detail warning codes
The following table lists all detail errors. Some of the detail errors can
also occur as warnings with the same code.
The error or the warning can be identified using the flashing code in
column 1 based on the number of flashes on the front panel LEDs.
The “TopControl/HMI indication” column contains the exact wording in
TopControl (“Show Errordetail”/”Show Warndetail” button). The texts
are truncated on the HMI/RCU for space reasons. The errors can however
be unambiguously identified from the code given first.
2011-10-18 277 / 298 V00.05b