Manual

Manual – TopCon TC.GSS
Handling gridfiles
TopControl application
Tab –
2011-10-18 241 / 298 V00.05b
1
6
2
3
4
5
7 8
Fig. 137 The “Gridfile” submenu on the tab.
“Gridfile” button – submenu
1 Indication/list box actual gridfile
2
3
4
5
New gridfile, menu item
An empty gridfile list opens and a new gridfile name appears in the box -
1- : GridfileXXX.gr3; (XXX≙0...999)
Load gridfile..., menu item opens Explorer window
Load one or more gridfiles from the required folder.
The name of the gridfile loaded appears in the box -1-.
Edit header..., menu item opens window
In the “Edit Gridfile header...” window the meta data for a new gridfile can be
defined or the meta data for an existing gridfile can be changed.
Contact Regatron support first.
Close gridfile, menu item
The gridfile indicated in the list box -1- is closed.
The gridfile is no longer included in the parameter list.
6 Load Standard init..., Only for use by the manufacturer!
7 Create update gridfile..., Only for use by the manufacturer!
8
9
Save gridfile/Save gridfile as..., menu item opens window
The following parameters can be selected on saving the gridfile:
Folder in the file system
Name of the gridfile. File extension: file_name.gr3
Gridfile Manager, submenu opens window
Points -3-, -5-, -8- are combined in the window.
As a result several gridfiles can also be edited at the same time.
Table 124 Meaning of the parameters on the “Gridfile” submenu.
9
7