Manual

Manual – TopCon TC.GSS
TopControl application
Tab –
Troubleshooting in group
6
2011-10-18 177 / 298 V00.05b
5
1 2
Fig. 97 Screenshots of the System status group and the
“Errordetails” dialog box.
System status group – parameter description
1
2
3
4
Error or warning indication
Red colour: There is an error.
Orange colour There is a warning.
Grey colour: There is no error or warning.
Buttons 1
In case of an error Button is activated (black font).
Makes it possible to open error messages -4-.
No error Button is deactivated (grey font).
Not possible to open the error messages -4-.
Same as in , only for warnings.
, button
List of the error messages that have occurred is opened.
Error-/Warndetails 1 , dialog box for indicating errors/warnings
An error indicated is listed in the related error group.
An error description has an error code and error keywords.
This information is used for troubleshooting using an error list.
For error list see chapter 10.2.2, Seite 277.
5 see -3-.
6
button
After the reason for the error has been rectified with the aid of the information
indicated -4- and the error list, the error status can be reset using the buttons.
The device is then ready for operation again.
Table 82 Parameters in the System status group.
1 Similar procedure for warnings.
4
7
3