Manual

Manual – TopCon TC.GSS
TopControl application
Tab –
Description of the standard scope gridfile
The following signals are arranged as per their group membership
(“group” or “select group”) in the standard gridfile. See Table 103, Seite
208.
Actual values group – “Act.values”
siADC_ActUsense
siCTR_ActImodule
siCTR_ActIsystem
siCTR_ActPmodule
siCTR_ActPsystem
siCRT_ActUmodule
siCTR_ActUsystem
Actual device sense voltage
Value range: 0 – 4000; (4000 ≙ Nominal voltage)
Device role: Valid for master and slave
Actual device output current
Value range: 0 – 4000; (4000 ≙ Maximum current)
Device role: Valid for master and slave
Actual multi-unit system output current.
≙ The sum of all power supplies connected in parallel.
Single device operation: Module current ≙ System current
Value range: 0 – 4000; (4000 ≙ System nominal current)
Refresh: 300 s x number of slaves
Device role: Valid for master
Actual device output power
Value range: 0 – 4000; (4000 ≙ Nominal power)
Device role: Valid for master and slave
Actual multi-unit system output power.
≙ The sum of all power supply powers.
Single device operation: Module power ≙ System power
Value range: 0 – 4000;
(4000 ≙ System nominal power)
Refresh: 300 s x number of slaves
Device role: Valid for master
Actual device output voltage
Value range: 0 – 4000; (4000 ≙ Nominal voltage)
Device role: Valid for master and slave
Actual multi-unit system output voltage.
≙ The sum of all power supplies connected in series.
In single device operation: Module voltage ≙ System voltage
Value range: 0 – 4000;
(4000 ≙ System nominal voltage)
Refresh: 300 s x number of slaves
Device role: Valid for master
Table 104 Description of the variables that are allocated to the “Act.values” group.
2011-10-18 209 / 298 V00.05b
7