Manual

Manual – TopCon TC.GSS
TopControl application
Tab –
Fig. 134 Overview of the tab.
tab – overview
1
2
3
4
5
6
7
Parameter list
The characteristics of the parameters in a gridfile are shown in list form.
Filtering and grouping
The parameter list -1- can be grouped and filtered such that certain signals
are hidden or shown. See Fig. 136, Seite 239.
TopCon memory
By clicking the related button an edited parameter list can be written (“Write”)
to the memory in the TopCon GSS power supply, and verified (“Verify”) or
read (“Read”).
For repeated reading from the memory, the “cont. read” -2- check box must be
selected.
Factory
Only for use by the manufacturer!
Factory
Only for use by the manufacturer or only in consultation with Regatron.
It is possible to insert new parameters or edit parameters manually.
, button opens new submenu
Gridfiles can be loaded and saved, see Fig. 137, page 241.
Read-only indication
Indicates the location of the actual gridfile in the file system and the firmware
version that matches the gridfile is shown beside “Device Version”. Gridfile
and firmware version must match.
Table 121 Overview of the tab.
2011-10-18 236 / 298 V00.05b
1
7
2
3
4
5
6
7