Manual

Manual – TopCon TC.GSS
Single device operation – special aspects
Sense connection
Sense activation/deactivation in the TopControl application
The sense function can be found on the -1- tab, and the parameters
defined in the “Voltage sensing” -2- group.
The entire function is activated/deactivated via the “Use sense input” -3-
check box.
For information on the significance of the parameters see chapter 7.4.8.5,
Seite 219.
2
3
Fig. 18 Configuration of the sense function in TopControl.
Sense actual value indication
On the activation of the sense function, the following indications alternate:
tab
The labels “Output Voltage” -1- and “Output Power” -1- change
to “Sense Voltage” -2- and “Sense Power” -2-
2011-10-18 43 / 298 V00.05b
1
2
Fig. 19 Indication change between output voltage and sense voltage.
-3- tab
Along with the indication of the output values -1- the sense actual
values -2- are also displayed.
Fig. 20 Indication of the output values.
3
1
1
2
4